People
is Professor at Bauhaus-University Weimar and is Head of the Chair of Data Science in Civil Engineering. He was head of the work group ‘Simulation in Applied Mechanics’ at the Chair of Computational Modeling and Simulation and has a fifteen year-long scientific record in that field. In this project, he is responsible for the development of simulation methods for metal based artefacts.
is developing efficient finite element methods for engineering applications at the Chair of Data Science in Civil Engineering of the Bauhaus-Universität Weimar. One of his research areas is the spatiotemporally adaptive resolution and numerical optimization of additive manufacturing processes. He also focusses on immersed simulations of 3D-printed geometries and on spectral element or spectral cell methods for inverse problems in non-destructive testing.
is responsible for WPs 3-5 and contributes to HPC and setup related aspects of the corresponding simulations. He advises Dr. Kutscher in conducting the simulations and the analysis of the results. He also takes responsibility for the data exchange with other projects within the TRR.
is a researcher at the TT Professorship for Digital Fabrication within TUM. She received her architecture master’s degree at TUM in 2022, focusing on computational methods in architecture. Project(s) Project A 10 Earth Additive Manufacturing (EAM) – Material and Process Combinations for AM with Earth-based Materials
Head of workgroup concrete technology and assists Prof. Gehlen in leading project A02. He instructs and supports the academic staff regarding additive manufacturing and concrete technological questions.
is the lead developer of the VirtualFluids software. In this function he is indispensable for the project as a new doc. res. could not possibly extend the existing framework (>700,000 lines of code) with the new models to be developed and adapted in WP 1-4. He is also experienced in conducting massively parallel runs on THIER-0 systems and analyzing huge data sets with more than 10 degrees of freedom.
Head of the institute for particle technology. Head of iPAT and supports the academic staff regarding the conditioning of particle products.
is a doctoral researcher at TU Braunschweig. He is responsible for developing material model of concrete used in additive manufacturing. His doctoral research also focuses on simulating the additive manufacturing deposition process on a part scale. Moreover, he will frequently publish the achieved results within the community.
is a postdoctoral researcher at the ITE. He is responsible for design strategies and possible applications. This includes the development of new structures, semi-finished parts and the concept for on-site WAAM as well as life cycle analysis and the creation of Digital Twins. He also prepares reports, presentations and publications.
His task is to develop a DDSS at a early design phase integrating AM. The expected system needs to combine both hard rules (boundary conditions) and experts’s experience, in order to advise the designer (architect) for feasible AM methods regarding to different building components.
Prof. Dr.-Ing. Dirk Lowke is head of the Professorship of Binder Jetting Technology. He will advise the scientific staff executing their work under consideration of the formulated project aims. He is responsible for the coordination and quality control of all work of Professorship of Binder Jetting Technology.
is a doctoral researcher at the Professorship of Technical Education at TUM School of Social Sciences and Technology. The focus of his work in C07 is on the competence and qualification requirements of the involved experts in order to have trained professionals for a later implementation of AMC. For this, the different processes must be analyzed in their entirety from the perspective of handling and problem-solving activities.
is an associate researcher at the IGP and will help with supervision of one of the doctoral researchers. His expertise in computer vision, scanning technologies and implementing deep learning methods will be used in this project.
is Professor at School of Engineering and Design, Department of Materials Engineering – Technical University of Munich. In her doctoral research the focus is on dolomite calcined clay composite cement.
is Junior-Professor at the Institute of Civil Engineering, Department of Robotic Manufacturing of the Built Environment at Technische Universität Berlin.
General Manager / administrative coordinator. He is organizing the day-to-day management of the SFB TRR 277 AMC, supports the Speaker and Co- speaker such as the AMC Board in the coordination of the TRR 277. He is reporting to the AMC Board and is head of the AMC Business Office (AMC-Geschäftsstelle).
Doctoral researcher at IGP: The researcher Will Provide an inspection process chain utilizing new digital tools to perform the quality inspection of the as-built model of AMC products (mainly concrete) with its digital twin on the component level. Moreover, the next focus would be building scale monitoring of the construction site and establishing accurate coordinate systems to support the positioning during the project.
is a doctoral researcher at the Institute for Machine Tools and Production Technology (IWF) at TU Braunschweig. He is working on the development of different end effectors for an automated concrete reinforcement. Additionally he is developing different nozzle geometries for the SC3DP process. Moreover, he will frequently publish the results achieved within the community.
Dr.-Ing. Samim Mehdizadeh co-leads research activities and supervises doctoral researchers in the areas of lightweight concrete, on-site robotic fabrication, and multi-robotic fabrication. Within the Collaborative Research Center TRR 277 “Additive Manufacturing in Construction” (AMC), he co-leads the research projects A-05 and A-09 together with Prof. Norman Hack at the Institute for Structural Design (ITE) at TU Braunschweig.
is a research associate in the work group of Prof. Dr.-Ing. Arno Kwade. He is responsible for the development of tailored particles for the SCA process.
