Prof. Dr.-Ing. Inka Mai
is Junior-Professor at the Institute of Civil Engineering, Department of Robotic Manufacturing of the Built Environment at Technische Universität Berlin.
Project(s)
Particle-Bed 3D Printing by Selective Cement Activation (SCA) – Particle Surface Functionalisation, Particle-Bed Compaction and Reinforcement Implementation
Integrated Additive Manufacturing Processes for Reinforced Shotcrete 3D Printing (SC3DP) Elements with Precise Surface Quality
Publications
2022 | Lachmayer, L.; Böhler, D.; Freund, N.; Mai, I.; Lowke, D.; Raatz, A.: Modelling the influence of material and process parameters on shotcrete 3D printing strands – cross-section adjustment for automatic robotic manufacturing. Automation in Construction, Volume 145, https://doi.org/10.1016/j.autcon.2022.104626
2022 | Böhler, D., Mai, I., Freund, N., Lachmayer, L., Raatz, A., Lowke, D.: Influence of Material and Process Parameters on Hardened State Properties of Shotcrete 3D-Printed Elements. In: Buswell, R., Blanco, A., Cavalaro, S., Kinnell, P. (eds) Third RILEM International Conference on Concrete and Digital Fabrication. DC 2022. RILEM Bookseries, vol 37. Springer, Cham.
https://doi.org/10.1007/978-3-031-06116-5_38
2022 | Herding, F., Mai, I., Lowke, D.: Effect of Curing in Selective Cement Activation. In: Buswell, R., Blanco, A., Cavalaro, S., Kinnell, P. (eds) Third RILEM International Conference on Concrete and Digital Fabrication. DC 2022. RILEM Bookseries, vol 37. Springer, Cham.
https://doi.org/10.1007/978-3-031-06116-5_42
2022 | Mai, I.; Lowke, D.; Perrot, A.: Fluid intrusion in powder beds for selective cement activation – an experimental and analytical study. In: Cement and Concrete Research, CCR 156 (106771), 2022
https://doi.org/10.1016/j.cemconres.2022.106771
2022 | Lowke, D.; Mai, I.; Keita, E.; Perrot, A.; Weger, D.; Gehlen, C.; Herding, F.; Zuo, Wenqiang; Roussel, N.: Material-process interactions in particle bed 3D printing and the underlying physics. In: Cement and Concrete Research, CCR 156 (106748), 2022
https://doi.org/10.1016/j.cemconres.2022.106748
2022 | Mai, I., Herding, F., Lowke, D.: Evaluating the Effect of Methyl Cellulose on Hardened State Properties in Selective Cement Activation. In: Buswell, R., Blanco, A., Cavalaro, S., Kinnell, P. (eds) Third RILEM International Conference on Concrete and Digital Fabrication. DC 2022. RILEM Bookseries, vol 37. Springer, Cham.
https://doi.org/10.1007/978-3-031-06116-5_43
2022 |Lowke, D.; Mai, I.; Perrot, A.: Fluid intrusion in powder beds for selective cement activation – An experimental and analytical study, In: Cement and Concrete Research, Volume 156, June 2022, 106748, DOI: http//:doi.org/10.1016/j.cemconres.2022.106771
2022 |Lowke, D.; Mai, I.; Keita, E.; Perrot, A.; Weger, D,; Gehlen, C.; Herding, F.; Zuo, W.; Roussel, N.: Material-process interactions in particle bed 3D printing and the underlying physics, In: Cement and Concrete Research, Volume 156, June 2022, 106748, DOI: http//:doi.org/10.1016/j.cemconres.2022.106748
2020 | Freund, N.; Dressler, I.; Lowke, D.: Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process. In: RILEM Bookseries 28, pp. 612–621, 2020. – DOI: https://doi.org/10.1007/978-3-030-49916-7_62.
2020 | Dressler, I.; Freund, N.; Lowke, D.: Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage amd Process Parameters. In: RILEM Bookseries 28, pp. 42–52, 2020. – DOI: https://doi.org/10.1007/978-3-030-49916-7_5.
2020 | Lowke, D.; Talke, D.; Dreßler, I.; Weger, D.; Gehlen, C.; Ostertag, C.; Rael, R.: Particle bed 3D printing by selective cement activation – Applications, material and process technology. In: Cement and Concrete Research 134,2020. – DOI: https://doi.org/10.1016/j.cemconres.2020.106077.
2020 | Dreßler, I.; Freund, N.; Lowke, D.: The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing. In: Materials 2020, 13, 374, 2020. – DOI: https://doi.org/10.3390/ma13020374.
2021 | Mai, I.; Brohmann, L.; Freund, N.; Gantner, S.; Kloft, H.; Lowke, D.; Hack, N.: Large Particle 3D Concrete Printing – A Green and Viable Solution. In: Materials, 14, 6125, 2021. DOI: https://doi.org/10.3390/ma14206125.
2021 | Gehlen, C.; Lowke, D.; Weger, D.; Dreßler, I.: Dauerhaftigkeit – Potenzial additiver Fertigung und Performance im Vergleich zu konventioneller Fertigung. In: BfT International, 02.2021, S. 94, 2021.
2020 | Hack, N.; Dressler, I.; Brohmann, L.; Gantner, S.; Lowke, D.; Kloft, H.: Injection 3D Concrete Printing (I3DCP): Basic Principles and Case Studies. In: Materials 2020, 13, 1093, 2020. – DOI: https://doi.org/10.3390/ma13051093.
