Additive Manufacturing in Construction
AMC TRR 277

M. Sc. Johannes Diller

Current location: TU München
Institute: Chair of Metal Structures
OrcidiD: 0000-0002-0059-0544

johannes.diller@tum.de

Doctoral researcher: for the duration of the research project carrying out the scientific studies. He will execute heat treatment, mechanical testing, and metallurgical analysis, the investigation of geometry influence on structural performance and finally the analysis of results in view of first AM design guidelines.

Project(s)

Project A 06

Laser Powder-Bed Fusion (LPBF) of Steel Elements for Construction – Basics of Design and Mechanical Resilience.

Publications

2024 | J. Diller, L. Siebert, M. Winkler, D. Siebert, J. Blankenhagen, D. Wenzler, C. Radlbeck, M. Mensinger: An integrated approach for detecting and classifying pores and surface topology for fatigue assessment 316L manufactured by powder bed fusion of metals using a laser beam using CT and machine learning algorithms, Fatigue Fract Eng Mater Struct., 2024, 1-16, https://doi.org/10.1111/ffe.14375

2024 | J. Diller, J. Blankenhagen, D. Siebert, C. Radlbeck, M. Mensinger: Combined effect of surface treatment and heat treatment on the fatigue properties of AISI 316L, manufactured by powder bed fusion of metals using a laser (PBF-LB/M), International Journal of Fatigue, Volume 178, 2024, 108025, ISSN 0142-1123, https://doi.org/10.1016/j.ijfatigue.2023.108025

2023 | J. Diller, C. Radlbeck, D. Siebert, J. Blankenhagen, D. Gubetini, F. Oberhaidinger, M. Mensinger: Additive Manufacturing in Construction – Implementing Powder-Bed Fusion of Metals Using a Laser ({PBF}-{LB}/M) and Shape Optimization in the Construction Design Process. In: Engineering proceedings, 2023.
https://doi.org/10.3390/engproc2023043010

2023 | A. Ghantasala, J. Diller, A. Geiser, D. Wenzler, D. Siebert, C. Radlbeck, R. Wüchner, M. Mensinger, K.U. Bletzinger: Node-Based Shape Optimization and Mechanical Test Validation of Complex Metal Components and Support Structures, Manufactured by Laser Powder Bed Fusion. In: Trzcielinski, S., Mrugalska, B., Karwowski, W., Rossi, E., Di Nicolantonio, M. (eds) Advances in Manufacturing, Production Management and Process Control. AHFE 2021. Lecture Notes in Networks and Systems, vol 274. Springer, Cham.
https://doi.org/10.1007/978-3-030-80462-6_2

2023 | Wenzler, D.L., Bergmeier, K., Baehr, S., Diller, J., Zaeh, M.F.:  A Novel Methodology for the Thermographic Cooling Rate Measurement during Powder Bed Fusion of Metals Using a Laser Beam. In: Integrating Materials and Manufacturing Innovation. (2023) https://doi.org/10.1007/s40192-023-00291-w

2022 | lautet Diller, J.; Siebert, D.; Radlbeck, C.; Mensinger, M: PBF-LB/M/316L vs. hot-rolled 316L – comparison of cyclic plastic material behavior. In: Procedia Structual Integrity 2022

2022 | Diller, J.; Rier, L.; Siebert, D.; Radlbeck, C.; Krafft, F.; Mensinger, M.: Cyclic plastic material behavior of 316L manufactured by laser powder bed fusion (PBF-LB/M). , In: Materials Characterization, Volume 191, 2022, 112153, ISSN 1044-5803, https://doi.org/10.1016/j.matchar.2022.112153.

 

 

2021 | Ghantasala, A.; Diller, J.; Geiser, A.; Wenzler, D.; Siebert, D.; Radlbeck, C.; Wüchner, R.;  Mensinger, M.; Bletzinger, K.U.: Node-Based Shape Optimization and Mechanical Test Validation of Complex Metal Components and Support Structures, Manufactured by Laser Powder Bed Fusion. In: Advances in Manufacturing, Production Management and Process Control. AHFE 2021; Lecture Notes in Networks and Systems, vol 274. Springer, Cham. – DOI: https://doi.org/10.1007/978-3-030-80462-6_2.

2020 | Diller, J.; Radlbeck, C.; Mensinger, M: Einfluss der Abkühlrate auf das Korngefüge von Bauteilen aus austenitischem Edelstahl, hergestellt durch pulverbettbasiertes Laserstrahlschmelzen (LPBF) In: DASt-Kolloqium 2020

Next AMC TRR 277 members

WordPress Lightbox