Gerke, Markus Prof. Dr.-Ing. Archives - Additive Manufacturing in Construction (AMC) TRR277

Erste Erkenntnisse zur Bewegungsanalyse bei additiven Fertigungsprozessen

2025 | G. Placzek, J. Thormählen, M. Altmann, M. Gerke, P. Schwerdtner: Erste Erkenntnisse zur Bewegungsanalyse bei additiven Fertigungsprozessen Tagungsband 34. BBB Assisten*innen-Tagung 2025 Berlin, 2025, pp. 238–253, https://doi.org/10.14279/depositonce-23997 Data |Zenodo,…

Geometric Inspection in 3D Concrete Manufacturing: Comparison of Data Capturing Techniques

2025 | M. Maboudi, K. Mawas, M. Gerke: Geometric Inspection in 3D Concrete Manufacturing: Comparison of Data Capturing Techniques International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLVIII-G-2025,…

Project C 06

Prof. Dr.-Ing. Markus Gerke

instructs the other doc. researcher in the fields of surveying, scanning and machine learning. A particular task will be the coordination of participants involved with this and other projects.

Filament Extraction in 3D Printing of Shotcrete Walls from Terrestrial Laser Scanner Data

2023 | K. Mawas, M. Maboudi, M. Gerke: Filament Extraction in 3D Printing of Shotcrete Walls from Terrestrial Laser Scanner Data. In: The ISPRS Geospatial (Egypt GSW'23) Remote Sensing For…

A Review on Viewpoints and Path Planning for UAV-Based 3D Reconstruction

2023 | M. Maboudi, M. Homaei, S. Song, S. Malihi, M. Saadatseresht, and M. Gerke: A Review on Viewpoints and Path Planning for UAV-Based 3D Reconstruction. In: IEEE Journal of…

Digital Twinning in Additive Manufacturing – Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication Information Models

2022 | M. Slepicka, K. Mawas, A. Borrmann, M. Maboudi, M. Gerke: Digital Twinning in Additive Manufacturing - Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication…

TRR277 Person: Gerke, Markus Prof. Dr.-Ing.

Erste Erkenntnisse zur Bewegungsanalyse bei additiven Fertigungsprozessen

Geometric Inspection in 3D Concrete Manufacturing: Comparison of Data Capturing Techniques

Project C 06

Prof. Dr.-Ing. Markus Gerke

Filament Extraction in 3D Printing of Shotcrete Walls from Terrestrial Laser Scanner Data

A Review on Viewpoints and Path Planning for UAV-Based 3D Reconstruction

Digital Twinning in Additive Manufacturing – Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication Information Models

A Closed-Loop Workflow for Quality Inspection and Integrated Post-processing of 3D-Printed Concrete Elements

Additive Manufacturing using mobile robots: Opportunities and challenges for building construction

Automatic geometric inspection in digital fabrication

Current Page

Social Media

Uni-Logos

Supporters