Diller, Johannes M. Sc. Archives - Additive Manufacturing in Construction (AMC) TRR277

Mechanical properties and microstructure of hybrid-manufactured 316 L using PBF-LB/M and DED-Arc/M

2025 | D. L. Wenzler, H. Jahns, J. Mueller, K. U. Beuerlein, F. Riegger, J. Diller, J. Unglaub, C. Radlbeck, J. Hensel, M. Mensinger, K. Thiele, M. F. Zaeh: Mechanical…

Material Characterization of (CN) Austenitic Stainless Steel Manufactured by Laser Powder Bed Fusion

2025 | J. Blankenhagen, J. Diller, D.Siebert, P. Hegele, C. Radlbeck, M. Mensinger: Material Characterization of (CN) Austenitic Stainless Steel Manufactured by Laser Powder Bed Fusion Metals 15, no. 2: 134,…

M. Sc. Johannes Diller

Doctoral researcher: for the duration of the research project carrying out the scientific studies. He will execute heat treatment, mechanical testing, and metallurgical analysis, the investigation of geometry influence on structural performance and finally the analysis of results in view of first AM design guidelines.

An integrated approach for detecting and classifying pores and surface topology for fatigue assessment 316L manufactured by powder bed fusion of metals using a laser beam using CT and machine learning algorithms

2024 | J. Diller, L. Siebert, M. Winkler, D. Siebert, J. Blankenhagen, D. Wenzler, C. Radlbeck, M. Mensinger: An integrated approach for detecting and classifying pores and surface topology for…

Combined effect of surface treatment and heat treatment on the fatigue properties of AISI 316L, manufactured by powder bed fusion of metals using a laser (PBF-LB/M)

2024 | J. Diller, J. Blankenhagen, D. Siebert, C. Radlbeck, M. Mensinger: Combined effect of surface treatment and heat treatment on the fatigue properties of AISI 316L, manufactured by powder bed…

Additive Manufacturing in Construction – Implementing Powder-Bed Fusion of Metals Using a Laser ({PBF}-{LB}/M) and Shape Optimization in the Construction Design Process

2023 | J. Diller, C. Radlbeck, D. Siebert, J. Blankenhagen, D. Gubetini, F. Oberhaidinger, M. Mensinger: Additive Manufacturing in Construction - Implementing Powder-Bed Fusion of Metals Using a Laser ({PBF}-{LB}/M)…

Node-Based Shape Optimization and Mechanical Test Validation of Complex Metal Components and Support Structures, Manufactured by Laser Powder Bed Fusion

2023 | A. Ghantasala, J. Diller, A. Geiser, D. Wenzler, D. Siebert, C. Radlbeck, R. Wüchner, M. Mensinger, K.U. Bletzinger: Node-Based Shape Optimization and Mechanical Test Validation of Complex Metal…

A Novel Methodology for the Thermographic Cooling Rate Measurement during Powder Bed Fusion of Metals Using a Laser Beam.

2023 | Wenzler, D.L., Bergmeier, K., Baehr, S., Diller, J., Zaeh, M.F.: A Novel Methodology for the Thermographic Cooling Rate Measurement during Powder Bed Fusion of Metals Using a Laser…

PBF-LB/M/316L vs. hot-rolled 316L – comparison of cyclic plastic material behavior

2022 | lautet Diller, J.; Siebert, D.; Radlbeck, C.; Mensinger, M: PBF-LB/M/316L vs. hot-rolled 316L – comparison of cyclic plastic material behavior. In: Procedia Structual Integrity 2022

Cyclic plastic material behavior of 316L manufactured by laser powder bed fusion (PBF-LB/M).

2022 | Diller, J.; Rier, L.; Siebert, D.; Radlbeck, C.; Krafft, F.; Mensinger, M.: Cyclic plastic material behavior of 316L manufactured by laser powder bed fusion (PBF-LB/M). , In: Materials…

TRR277 Person: Diller, Johannes M. Sc.

Mechanical properties and microstructure of hybrid-manufactured 316 L using PBF-LB/M and DED-Arc/M

Material Characterization of (CN) Austenitic Stainless Steel Manufactured by Laser Powder Bed Fusion

M. Sc. Johannes Diller

An integrated approach for detecting and classifying pores and surface topology for fatigue assessment 316L manufactured by powder bed fusion of metals using a laser beam using CT and machine learning algorithms

Combined effect of surface treatment and heat treatment on the fatigue properties of AISI 316L, manufactured by powder bed fusion of metals using a laser (PBF-LB/M)

Additive Manufacturing in Construction – Implementing Powder-Bed Fusion of Metals Using a Laser ({PBF}-{LB}/M) and Shape Optimization in the Construction Design Process

Node-Based Shape Optimization and Mechanical Test Validation of Complex Metal Components and Support Structures, Manufactured by Laser Powder Bed Fusion

A Novel Methodology for the Thermographic Cooling Rate Measurement during Powder Bed Fusion of Metals Using a Laser Beam.

PBF-LB/M/316L vs. hot-rolled 316L – comparison of cyclic plastic material behavior

Cyclic plastic material behavior of 316L manufactured by laser powder bed fusion (PBF-LB/M).

Current Page

Social Media

Uni-Logos

Supporters