Publications als Accordion Panel

2020 | Hack, N.; Kloft, H.; Lowke, D.: Additive Fertigung im Bauwesen: 3D-Betondruck als eine Schlüsseltechnologie für die Digitalisierung der Bauwirtschaft. In: Ingenieurbaukunst 2020 – Made in Germany, Jahrbuch der Bundesingenieurkammer, S. 178-183, 2020.

2020 | Geier, M.; Lenz, S.; Schönherr, M.; Krafczyk, M.: Under-resolved and large eddy simulations of a decaying Taylor-Green vortex with the cumulant lattice Boltzmann method. In: Theoretical and Computational Fluid, Dynamics 35, 169-208, 2021.

2020 | Buswell, R.A.; Leal da Silva; W.R.; Bos, F.P.; Schipper, H.R.; Lowke, D.; Hack, N.; Kloft, H.; Mechtcherine, V.; Wangler, T.; Roussel, N.: A process classification framework for defining and describing Digital Fabrication with Concrete. In: Cement and Concrete Research 134, 2020. https://doi.org/10.1016/j.cemconres.2020.106068.

2020 | Dreßler, I.; Freund, N.; Lowke, D.: The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing. In: Materials 2020, 13, 374, https://doi.org/10.3390/ma13020374.

2020 | Matthäus, C.; Kofler, N.; Kränkel, T.; Weger, D.; Gehlen, C.: Interlayer Reinforcement Combined with Fiber Reinforcement for Extruded Lightweight Mortar Elements. In: Materials 2020, 13, 4778, 2020. https://doi.org/10.3390/ma13214778.

2020 | Diller, J.; Auer, U.; Radlbeck, C., Mensinger, M.; Krafft, F.: Einfluss der Abkühlrate auf die mechanischen Eigenschaften von additiv gefertigten Zugproben aus 316L. In: Stahlbau 89, 2020. https://doi.org/10.1002/stab.202000034.

2020 | Wassermann, B.; Korshunova, N.; Kollmannsberger, S.; Rank, E.; Elber, G.: Finite Cell Method for functionally graded materials based on V-models and homogenized microstructures. In: Advanced Modeling and Simulation in Engineering Sciences – (7), pp. 49, 2020. DOI: 10.1186/s40323-020-00182-1.

2020 | Placzek, G.; Schwerdtner, P.: Ableitung von Integrationsansätzen des “Beton-3D-Drucks” in den Bauprozess anhand von Merkmalen der additiven Fertigung. In: Bauwirtschaft 4 (2020), ISSN: 2509-8594.

2020 | Empelmann, M.; Oettel, V.: 3D-printed reinforced-concrete elements – Testing and analysis of the structural behaviour. In: BFT International, no. 2, pp. 77.

2020 | Baghdadi, A.; Heristchian, M.; Ledderose, L.; Kloft, H.: Experimental and numerical assessment of new precast concrete connections under bending loads. In: Engineering Structures 212, ELSEVIER.

2020 | Kloft, H.; Empelmann, M.; Oettel, V.; Ledderose, L.: 3D Concrete Printing – Production of first 3D Printed Concrete Columns and Reinforced Concrete Columns. In: BFT International, no. 6, pp. 28–37

2020 | Maboudi, M.; Gerke, M.; Hack, N.; Brohmann, L.; Schwerdtner, P.; Placzek, G.: Current Surveying Methods for the Integration of Additive Manufacturing in the Construction Process. In: The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XLIII-B4-2020, 2020 XXIV ISPRS Congress, https://doi.org/10.5194/isprs-archives-XLIII-B4-2020-763-2020.

2020 | Buswell, R.; Kinnell, P.; Xu, J.; Hack, N.; Kloft, H.; Maboudi, M.; Gerke, M.; Massin, P.; Grasser, G.; Wolfs, R.; Bos, F.: Inspection Methods for 3D Concrete Printing. In: RILEM Bookseries 28, pp. 790-803.

2020 | Dressler, I.; Freund, N.; Lowke, D.: Control of Stand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage amd Process Parameters. In: RILEM Bookseries 28, pp. 42–52.

2020 | Freund, N.; Dressler, I.; Lowke, D.: Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process. In: RILEM Bookseries 28, pp. 612–621.

2020 | Kloft, H.; Empelmann, M.; Hack, N.; Herrmann, E.; Lowke, D.: Bewehrungsstrategien für den Beton‐3D‐Druck. In: Beton- und Stahlbetonbau. DOI: 10.1002/best.202000032.

2020 |Kloft, H.; Krauss, H.-W.; Hack, N.; Herrmann, E.; Neudecker, S.; Varady, P.; Lowke, D.: Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP). In: Cement and Concrete Research 134, S. 106078. DOI: 10.1016/j.cemconres.2020.106078.

2020 | Lowke, D.; Talke, D.; Dreßler, I.; Weger, D.; Gehlen, C.; Ostertag, C.; Rael, R.: Particle bed 3D printing by selective cement activation – Applications, material and process technology. In: Cement and Concrete Research134 106077.

2020 | Weger, D.; Baier, D.; Straßer, A.; Prottung, S.; Kränkel, T.; Bachmann, A.; Gehlen, C.; Zäh, M.: Reinforced Particle-Bed Printing by Combination of the Selective Paste Intrusion Method with Wire and Arc Additive Manufacturing – A First Feasibility Study. In: RILEM International Conference on Concrete and Digital Fabrication.

2019 | Beitz, S.; Uerlich, R.; Bokelmann, T.; Diener, A.; Vietor, T.; Kwade, A.: Influence of Powder Deposition on Powder Bed and Specimen Properties. In: Materials, 12, 2, 297.

2019 | Rößler, T.; Richter, C.; Katterfeld, A.; Will, F.: Development of a standard calibration procedure for the DEM parameters of cohesionless bulk materials part I – solving the problem of ambiguous parameter combinations. In: Powder technology, Vol. 343, pp. 803-812.

2019 | Rößler, T.; Katterfeld, A.: DEM parameter calibration of cohesive bulk materials using a simple angle of repose test. In: Particuology.

2019 | Dietrich, K. et al.: The influence of oxygen during laser powder bed Fusion (L-PBF). vol. (Currently under review).

2019 | Köhler, M.; Fiebig, S.; Hensel, J.; Dilger, K.: Wire and Arc Additive Manufacturing of Aluminum Components. In: Metals, vol. 9, no. 5, p. 608.doi: 10.3390/met9050608.

2019 | Müller, J.; Grabowski, M.; Müller, C.; Hensel, J.; Unglaub, J.; Kloft, H.; Thiele, K.; Dilger, K.: Design and parameter identification of Wire and Arc Additively Manufactured (WAAM) steel bars for use in construction. vol. 9, no. 7, p. 725. doi:10.3390/met9070725.

2019 | Sun, J.; Hensel, J.; Klassen, J.; Nitschke-Pagel, T.; Dilger, K.: Solidstate phase transformation and strain hardening on the residual stresses in S355 steel weldments. In: Journal of Materials Processing Technology, vol. 265, pp 173-184, doi: 10.1016/j.jmatprotec.2018.10.018.

2019 | Rößler, T.; Katterfeld, A.: DEM parameter calibration of cohesive bulk materials using a simple angle of repose test. In: Particuology– Amsterdam: Elsevier, 2008, total 11 S.

2019 | Lindemann, H.; Gerbers, R.; Ibrahim, S.; Dietrich, F.; Hermann, E.; Dröder, K.; Raatz, A.; Kloft, H.: Development of a Shotcrete 3D-Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures. In: Digital Concrete, pp. 287-298.

2019 | Dörfler, K.; Hack, N.; Sandy, T.; Giftthaler, M.; Lussi, M.; Buchli, J.; Gramazio, F.; Kohler, M.: Mobile robotic fabrication beyond factory conditions: Case study Mesh Mould wall of the DFAB HOUSE. In: Construction Robotics Springer Journals (accepted),.

2019 | Wassermann, B.; Kollmannsberger, S.; Yin, S.; Kudela, L.; Rank, E.: Integrating CAD and numerical Analysis: ‘Dirty Geometry’ handling using the Finite Cell Method. In: Computer Methods in Applied Mechanics and Engineering, vol. 351, pp.808-835.

2019 | Kollmannsberger, S.; Carraturo, M.; Reali, A.; Auricchio, F.: Accurate Prediction of Melt Pool Shapes in Laser Powder Bed Fusion by the Non- Linear Temperature Equation Including Phase Changes. In: Integrating Materials and Manufacturing Innovation, vol. 8(2), pp. 167-177.

2019 | Zahedi, A.; Abualdenien, J.; Petzold, F.; Borrmann, A.: Minimized communication protocol based on a multi-LOD meta-model for adaptive detailing of BIM models. In: Proc. of the 26th International Workshop on Intelligent Computing in Engineering, Leuven, Belgium.

2019 | Abualdenien, J.; Borrmann, A.: A meta-model approach for formal specification and consistent management of multi-LOD building model: In: Adv. Eng. Inf., 40(1), pp. 135-153.

2019 | Fanta-Jende, P.; Nex, F.; Vosselman, G.; Gerke, M.: Co-registration of panoramic mobile mapping images and oblique aerial images. Photogramm. Rec.

2019 | Pittich, D.; Tenberg, R.; Lensing, K.: Learning factories for complex competence acquisition. In: European Journal of Engineering Education, DOI: 10.1080/03043797.2019.1567691.

2019 | Pittich, D.; Tenberg, R.; Lensing, K.: Technikdidaktische Herausforderungen im Übergang zu Industrie 4.0, Die vierte industrielle Revolution und ihre Herausforderungen für die Hochschuldidaktik. In: ed. by Terkowsky, C. et. al (Ed.), pp.167-182.

2019 | Matthäus, C.; Weger, D.; Kränkel, T.; Santos Carvalho, L.; Gehlen, C.: Extrusion of lightweight concrete: rheological investigations. In: Proc. of RheoCon, Dresden, accepted.

2019 | Zerbst, U.; Madia, M.; Schork, B.; Hensel, J.; Kucharczyk, P.; Tchoffo Ngoula, D.; Tchuindjang, D.; Bernhard, J.; Beckmann, C.: Fatigue and Fracture of Weldments. Springer, Cham. doi: 10.1007/978-3- 030-04073-4.

2018 | Lowke, D.; et al.: Particle-bed 3D printing in concrete construction – possibilities and challenges. In: Cement and Concrete Research Vol. 112, 50- 65.

2018 | Pierre, A.; et al.: Penetration of cement pastes into sand packings during 3D printing. In: Materials and Structures 51:22, 1-12.

2018 | Prziwara, P.; Breitung-Faes, S.; Kwade, A.: Impact of grinding aids on dry grinding performance, bulk properties and surface energy. In: Advanced Powder Technology 29, 2, 416-425.

2018 | Lowke, D.; Dini, E.; Perrot, A.; Weger, D.; Gehlen, C.; Dillenburger, B.: Particle-bed 3D printing in concrete construction – possibilities and challenges. In: Cem Conc Res 112.

2018 | Weger, D.; Lowke, D.; Gehlen, C.; Talke, D.; Henke, K.: Additive manufacturing of concrete elements using selective cement paste intrusion – Effect of layer orientation on strength and durability. In: Proc. of RILEM 1st Int. Conf. on Concrete and Digital Fabrication. Zurich.

2018 | Prziwara, P.; Breitung-Faes, S.; Kwade, A.: Impact of grinding aids on dry grinding performance, bulk properties and surface energy. In: Adv. Powder Technology 29.

2018 | Pierre, A.; Weger, D.; Perrot, A.; Lowke, D.: Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study. In: Materials and Structures, 51:22.

2018 | Zeller, C.; Surendran, B.; Zaeh, M. F.: Parameterized Extended Finite Element Method for high thermal gradients. In: J. Comput. Des. Eng. 5(3).

2018 | Pierre, A.; Weger, D.; Perrot, A.; Lowke, D.: Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study. In: Mater. Struct., Vol. 51:22.

2018 | Krauss, H.-W.; Nolte, N.; Budelmann, H.; Kloft, H.; Lowke, D.: Concrete Additive Manufacturing – challenges and solutions illustrated by the SC3DP process. In: 20. Ibausil, Weimar, 9 pp.

2018 | Lowke, D.: Thixotropy of SCC – A model descri- bing the effect of particle packing and superplasticizer adsorption on thixotropic structural build-up of the mortar phase based on interparticle interactions. In: Cem. Con. Res., Vol. 104, pp. 94-104.

2018 | Lowke, D.; et al.: Particle-bed 3D printing in concrete construction – possibilities and challenges. In: Cem. Con. Res., Vol. 112, pp. 50-65.

2018 | Nolte, N.; Varady, P.; Krauss, H.-W.; Lowke, D.: Schichtenverbund bei der additiven Fertigung – Einflussgrößen und Verfahrensvergleich. In: 20. Ibausil, Weimar, 8 pp.

2018 | Herrmann, E.; Lindemann, H.; Kloft, H.: Entwicklung einer robotergestützten Spritzbetontechnologie zur schalungslosen generativen Fertigung komplexer Betonbauteile. In: Proc. Spritzbeton-Tagung, Alpbach.

2018 | Kloft, H.; et al.: Digital fabrication as chance for a “New Standard” in concrete design. In: ICCDF 2018, Zürich.

2018 | Lindemann, H.; et al.: Development of a Shotcrete 3D-Printing (SC3DP) technology for additive manufacturing of reinforced freeform concrete structures. In: ICCDF 2018, Zürich.

2018 |  Buchli, J.; et al.: Digital in situ fabrication – Challenges and opportunities for robotic in situ fabrication in architecture, construction, and beyond. In: Cement and Concrete Research, vol. 112. pp. 66–75.

2018 | Scholl, N.; Minuth-Hadi, F.; Thiele, K.: Modelling the Strain Rate Dependent Hardening of Constructional Steel using semi-empirical models. In: Journal of Constructional Steel Research, S. 414– 424. doi: 10.1016/j.jcsr.2018.02.013.

2018 | Gusella, F.; Orlando, M.; Vignoli, A.; Thiele, K.: Flexural capacity of steel rack connections via the component method. In: Open Construction and Building Technology Journal. doi: 10.2174/1874836801812010090.

2018 | Schork, B.; Kucharczyk, P.; Madia, M.; Zerbst, U.; Hensel, J.; Bernhard, J.; Tchuindjang, D.; Kaffenberger, M.; Oechsner, M.: The effect of the local and global weld geometry as well as material defects on crack initiation and fatigue strength. In: Engineering Fracture Mechanics, vol. 198, pp. 103-122, doi: 10.1016/j.engfracmech.2017.07.001.

2018 | Bunzel, F.; Jesse, K.: Entwicklung formaldehydfreier Aminoharze auf Basis von Glyoxylsäure und Glyoxal für Holzwerkstoffe. In: Holztechnologie. 59 (3): 32-39.

2018 | Weger, D.; Lowke, D.; Gehlen, C.; Talke, D.; Henke, K.: Additive manufacturing of concrete elements using selective cement paste intrusion – effect of layer orientation on strength and durability. In: Proceedings of RILEM 1st International Conference on Concrete and Digital Fabrication, Zürich.

2018 | Carr, M.; Wheeler, C.; Williams, K.; Katterfeld, A.; Elphick, G.; Nettleton, K.; Chen, W.: Discrete element modelling of problematic bulk materials onto impact plates. In: CHoPS 2018: 9th International Conference for Conveying and Handling of Particulate Solids at the Greenwich Maritime Campus, London, London, total 6 S.

2018 | Chen, W.; Roberts, A.; Katterfeld, A.; Wheeler, C.: Modelling the stability of iron ore bulk cargoes during marine transport. In: Powder Technology, 2018, pp. 255-264. http://dx.doi.org/10.1016/j.powtec.2017.12.006

2018 | Amirshaghaghi, H.; Hassan Rahimian, M.; Safari, H.; Krafczyk, M.: Large Eddy Simulation of liquid sheet breakup using a two-phase lattice Boltzmann method. In: Computers & Fluids 160 : 93-107.

2018 | Geier, M.; Pasquali, A.: Fourth order Galilean invariance for the lattice Boltzmann method. In: Computers & Fluids, 166,: 139-151.

2018 | Kutscher, K.; Geier, M.; Krafczyk, M.: Multiscale simulation of turbulent flow interacting with porous media based on a massively parallel implementation of the cumulant Lattice Boltzmann method. In: Computers & Fluids: accepted, article in press.

2018 | Ibrahim, S.; Olbrich, A.; Lindemann, H.; Gerbers, R.; Kloft, H.; Dröder, K.; Raatz, A.: Automated Additive Manufacturing of Concrete Structures without Formwork – Concept for Path Planning. In: Proc. 3rd MHI Conference, Erlangen.

2018 | Buchli, J.; Lussi, M.; Giftthaler, M.; Dörfler, K.; Sandy, T.; Hack, N.; Kumar, N.: Digital in situ fabrication—Challenges and opportunities for robotic in situ fabrication in architecture, construction, and beyond. In: Cement and Concrete Research. Elsevier. Amsterdam.

2018 | Lussi, M.; Sandy, T.; Dörfler, K.; Hack, N.; Gramazio, F.; Kohler, M.; Buchli, J.: Accurate and Adaptive In situ Fabrication of an Undulated Wall using an On-Board Visual Sensing System. In: Proceedings – IEEE International Conference on Robotics and Automation (ICRA 2018).

2018 | Paolini, A.; Frischmann, F.; Kollmannsberger, S.; Rabold, A.; Horger, T.; Wohlmuth, B.; Rank; E.: BIM gestützte strukturdynamische Analyse mit Volumenelementen höherer Ordnung. In: Bauingenieur 93 (4), pp. 160-166.

2018 | Kollmannsberger, S.; Özcan, A.; Carraturo, M.; Zander, N.; Rank, E.: A hierarchical computational model for moving thermal loads and phase changes with applications to Selective Laser Melting. In: Computers & Mathematics with Applications, vol. 75(5), pp. 1483-1497.

2018 | Özcan, A.; Kollmannsberger, S.; Jomo, J.; Rank, E.: Residual stresses in metal deposition modelling: discretizations of high order. In: Computers & Mathematics with Applications, in press available online, doi:10.1016/j.camwa.2018.10.027.

2018 | Zahedi, A.; Petzold, F.: Utilization of Simulation Tools in Early Design Phases Through Adaptive Detailing Strategies. In: Proc. of 23rd Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2018).

2018 | Hack, N. P.: Mesh Mould: A Robotically Fabricated Structural Stay-in-Place Formwork System. PhD thesis, ETH Zurich.

2018 | Maboudi, M.; Bánhidi, D.; Gerke, M.: Investigation of Geometric Performance of an Indoor Mobile Mapping System. In: IAPRS, vol. XLII-2, pp. 637–64.

2018 | Vetrivel, A.; Gerke, M.; Kerle, N.; Nex, F.; Vosselman, G.: Disaster damage detection through synergistic use of deep learning and 3D point cloud features derived from very high resolution oblique aerial images, and multiplekernel-learning. In: ISPRS J. Photogramm. Remote Sens., vol. 140, pp. 45–59, Jun.

2018 | Pittich, D.: Technisches Lernen an Fachhochschulen und Universitäten. In: B. Zinn, R. Tenberg, D. Pittich (ed.): Technikdidaktik – Eine interdisziplinäre Bestandsaufnahme. Stuttgart: Steiner Verlag, pp. 279-302.

2018 | Tavares de Sousa, N.; Hasselbring, W.; Weber, T.; Kranzlmüller, D.: Designing a Generic Research Data Infrastructure Architecture with Continuous Software Engineering.

2018 |Carrara, P.; et al.: Improved mesoscale segmentation of concrete from 3D X-ray images using con- trast enhancers. In: Cement and Concrete Composites Vol.93, 30-42.

2017 | Bonhoeffer, B.; Kwade, A.; Juhnke, M.: Impact of Formulation Properties and Process Parameters on the Dispensing and Depositioning of Drug Nanosuspensions Using Micro-Valve Technology. In: Journal of pharmaceutical sciences 106, 4, 1102–1110.

2017 | Prziwara, P.; Breitung-Faes, S.; Kwade, A.: Aspects of Dry Fine Grinding with Stirred Media Mills: From Batch to Continuous Processes. In: Proc. of the Europ. Symp. on Comminution and Classification, Izmir.

2017 | Dröder, K.; et al.: Incremental manufacturing: Design aspects of flexible hybrid manufacturing cells for multi-scale production. In: 7. WGP-Jahres-Kongress, Aachen.

2017 | Radlbeck, C.; et al.: Konstruieren mit Aluminium nach EC 9. In: Stahlbaukalender, vol., pp. 175– 310, 207.

2017 | Henke, K.; Talke, D.; Winter, S.: Multifunctional Concrete – Additive Manufacturing by the Use of Light-weight Concrete. In: IASS Annual Symposium – Interfaces architecture.engineering.science, Hamburg (Germany).

2017 | Bunzel, F.; Ritter, N.; Scholtyssek, J.: Holzschaum – eine Alternative zu petrochemischen Schaumstoffen. In: Holztechnologie. 58 (1): 31-35.

2017 | Geier, M.; Pasquali, A.; Schönherr, M.: Parametrization of cumulant lattice Boltzmann method for fourth order accurate diffusion part I: Derivation and validation. In: Journal of Computational Physics, 348,: 862-888.

2017 | Giftthaler, M.; Sandy, T.; Dörfler, K.; Brooks, I.; Buckingham, M.; Rey, G.; Kohler, M.; Gramazio, F.; Buchli, J.: Mobile Robotic Fabrication at 1:1 scale: the In situ Fabricator. In: Construction Robotics 1(1-4), 3{14. DOI 10.1007/s41693- 017-0003-5.

2017 | Hack, N.; Wangler, T.; Mata-Falcon, J.; Dörfler, K.; Kumar, N.; Walzer, A.N.; Graser, K.; Reiter, L.; Richner, H.; Buchli, J.; Kaufmann, W.; Flatt, R.J.; Gramazio, F.; Kohler, M.: Mesh Mould: An On Site, Robotically Fabricated, Functional Formwork. In: Proceedings of the Second Concrete Innovation Conference (2nd CIC).

2017 | Düster, A.; Rank, E.; Szabó, B.: The p-version of the Finite Element and Finite Cell Methods. In: Encyclopedia of Computational Mechanics, 2nd ed., Solids and Structures, E. Stein, R. de Borst and T.J.R. Hughes, John Wiley & Sons, Ltd.

2017 | Bletzinger, K.-U.: Shape Optimization. In: Encyclopaedia of Computational Mechanics, Erwin Stein, René de Borst and T. J. R. Hughes, eds.: John Wiley & Sons, Ltd.

2017 | Najian Asl, R.; Shayegan, S.; Geiser, A.; Hojjat, M.; Bletzinger, K.-U.: A consistent formulation for imposing packaging constraints in shape optimization using Vertex Morphing parametrization. In: Structural and Multidisciplinary Optimization, vol. 56, no. 6, pp. 1507-1519.

2017 | Prieto, A.; Klein, T.; Knaack, U.; Auer, T.: Main perceived barriers for the development of building service integrated facades: Results from an exploratory expert survey. In: Building Engineering, Vol. 13, pp. 96-106.

2017 | Mousa, W.A.Y.; Lang, W.; Auer, T.; Yousef, W.A.: A pattern recognition approach for modeling the air change rates in naturally ventilated buildings from limited steady-state CFD simulations. In: Energy and Buildings, Vol. 155, pp. 54-65.

2017 | de-Borja-Torrejón, M.; Leon-Rodriguez, A.; Auer, T.: Current and future demand-side management potential related to the thermal mass of residential buildings in Europe. In: Conference: IDA: Advanced Docotral Research in Architecture.

2017 | Wael, A.; Mousa, Y.; Lang, W.; Auer, T.: Numerical assessment of the efficiency of fenestration system and natural ventilation mechanisms in a courtyard house in hot climate. In: Building Simulation; 10(5)., DOI:10.1007/s12273-017-0357-0.

2017 | Prieto, A.; Knaak, U.; Klein, T.; Auer, T.: 25 Years of cooling research in office buildings: Review for the integration of cooling strategies into the building façade (1990-2014). In: Renewable and Sustainable Energy Reviews, 71:89-102, DOI:10.1016/j.rser.2017.01.012.

2017 | Prieto, A.; Knaak, U.; Auer, T.; Klein, T.: SOLAR COOLFACADES Framework for the integration of solar cooling technologies in the building envelope. DOI:10.1016/j.energy.2017.04.141.

2017 | Mousa, W.A.Y.; Lang, W.; Auer, T.: Assessment of the impact of window screens on indoor thermal comfort and energy efficiency in a naturally ventilated courtyard house. In: Architectural Science Review, Vol. 60, No. 5, 2017, pp. 382-394.

2017 | König, M.; Borrmann, A.; Geyer, P.; Schneider, P.; Lang, W.; Petzold, F.; Schellenbach-Held, M.: Evaluation of building design variants in early phases on the basis of adaptive detailing strategies and system-based simulation of energy flows for such models. In: Beyond BIM, pp. 1-3.

2017 | Vilgertshofer, S.; Borrmann, A.: Using graph rewriting methods for the semi-automatic generation of parametric infrastructure models. In: Adv. Eng. Inf., 33, pp. 502-515.

2017 | Roith, J.; Langenhan C.; Petzold, F.: Supporting the building design process with graph-based methods using centrally coordinated federated databases. In: Vis. in Eng., 5(1), pp. 20.

2017 | Niemeier, W.; Tengen, D.: Uncertainty assess- ment in geodetic network adjustment by combining GUM and Monte-Carlo-simulations. In:  J. Appl. Geod., vol. 11, no. 2, pp. 67–76, Jan.

2017 | Tenberg, R.; Pittich, D.: Ausbildung 4.0 oder nur 1.2? Analyse eines technisch betrieblichen Wandels und dessen Implikationen für die technische Berufsausbildung. In: Journal of Technical Education (JOTED), yr. 5 (vol. 1), pp. 27-46.

2017 | Henke, K.; Talke, D.; Winter, S.: Multifunctional Concrete – Additive Manufacturing by the Use of Leightweight Concrete. In: proc. IASS Annual Symposium, Hamburg (Germany).

2017 | Prieto, A.; Knaak, U.; Auer, T.; Klein, T.: Solar façade – Main barriers for widespread façade integration of solar technologies. DOI:10.7480/jfde.2017.1.1398.

2017 | Roith, J.; Langenhan, C.; Petzold, F.: Supporting the building design process with graph- based methods using centrally coordinated federated databases. In: Visualization in Engineering

, 5(1), 20. doi.org/10.1186/s40327-017-0057- y (accessed on 02.05.2019).

2017 | Schmidiger, M.; Kovacic, I.; Petzold, F.; Volm, M. (eds.): Digitalisierungsbarometer 2017. Verlag IFZ – Hochschule Luzern.

2016 | Weger D.; Lowke D.; Gehlen C.: 3D Printing of Concr. Struc. with Calcium Silicate based Cements using the Selective Binding Method – Effects of Concr. Techn. on Penetr. Depth of Cement Paste. In: Proc. of Hipermat, Kassel.

2016 | Rackl, M.; Günthner, W. (fml): Experimental investigation on the influence of different grades of wood chips on screw feeding performance. In: Biom. and Bioe., Vol. 88.

2016 | Weger, D.; Lowke, D.; Gehlen, C.: 3D printing of concrete structures using the selective binding method – Effect of concrete technology on contour precision and compressive strength. In: Proc. of 11th fib Int. PhD Symp. in Civ. Eng., Tokyo.

2016 | Neudecker, S.; Bruns, C.; Gerbers, R.; Heyn, J.; Dietrich, F.; Raatz, A.; Kloft, H.: A new robotic spray technology for generative manufacturing of complex concrete structures without formwork. In: Proc. CIRP, Vol. 43, pp. 333-338.

2016 | Dröder, K.; et al.: Partial additive manufacturing: experiments and prospects with regard to large series production. In: Proc. CIRP, Vol. 55, pp. 122- 127.

2016 | Niemann, S.; Hühne, C.; et. al.: Anisogrid Design for Fuselage Primary Structures – Results of EU/RU projects ALaSCA and PoLaRBEAR. In: Proceedings of the 5th Aircraft Structural Design Conference, Manchester.

2016 | Kappel, E.; Hühne, C.: Fertigungsinduzierte Deformationen von Hochleistungsverbundstrukturen. In: Lightweight Design 9 (2), S. 22–29. DOI: 10.1007/s35725-016-0005-0.

2016 | Schmid, D. et al.: Process Influences on Laserbeam Melting of the Magnesium Alloy AZ91. In: Physics Procedia, vol. 83, pp. 927–936.

2016 | Radlbeck, C. et al.: (Low Cycle) Fatigue Design According to DIN EN 1999-1-3: State of the Art and Current Research. In: Key Engineering Materials, vol. 2016, no. 710, pp. 439–444.

2016 | Pessel, S.; Mensinger, M.; Gehring, M.: Crack growth in the rail foot. In: 10th German-Japanese Bridge Symposium.

2016 | Henke, K.: Additive Baufertigung durch Extrusion von Holzleichtbeton. Doctoral Dissertation, Department of Civil, Geo and Environmental Engineering, Technical University of Munich.

2016 | Henke, K.; Talke, D.; Winter, S.: Additive Manufacturing of Building Elements by Extrusion of Wood Concrete. In: World Conference on Timber Engineering WCTE 2016, Vienna (Austria).

2016 | Rackl, M.; Günthner, W.: Experimental investigation on the influence of different grades of wood chips on screw feeding performance. In: Biom. and Bioe., Vol. 88.

2016 | Rackl, M.; Tan, Y.; Günthner, W. A.: Feeding of Biomass: Design Experience with Wood Chips. In: Bulk Solids Handling 36, 5, pp. 44-49, ISSN 01739980.

2016 | Fakhari, A.; Geier, M.; Lee, T.: A mass-conserving lattice Boltzmann method with dynamic grid refinement for immiscible two-phase flows. In: Journal of Computational Physics 315: 434- 457.

2016 | Kian Far, E.; Geier, M.; Kutscher, K.; Krafczyk, M.: Simulation of micro aggregate breakage in turbulent flows by the cumulant lattice Boltzmann method. In: Computers & Fluids, 140: 222- 231.

2016 | Neudecker, S.; Bruns, C.; Gerbers, R.; Heyn, J.; Dietrich, F.; Dröder, K.; Raatz, A.; Kloft, H.: A New Robotic Spray Technology for Generative Manufacturing of Complex Concrete Structures Without Formwork. In: Procedia CIRP 43, pp. 333–338.

2016 | Dörfler, K.; Sandy, T.; Giftthaler, M.; Gramazio, F.; Kohler, M.; Buchli, J.: Mobile Robotic Brickwork: Automation of a Discrete Robotic Fabrication Process Using an Autonomous Mobile Robot. In: Robotic Fabrication in Architecture, Art and Design, Sydney.

2016 | Di Stolfo, P.; Schröder, A.; Zander, N.; Kollmannsberger, S.: An easy treatment of hanging nodes in hp-finite elements. In: Finite Elements in Analysis and Design, vol. 121, pp. 101-117.

2016 | Heißler, M.; Franke, L.; Nemeth, I.; Auer, T.: Modeling low temperature district heating networks for the utilization of local energy potentials. In: Bauphysik 38(6):372-377., DOI:10.1002/bapi.201610038.

2016 | Vetrivel, A.; Gerke, M.; Kerle, N.; Vosselman, G.: Identification of Structurally Damaged Areas in Airborne Oblique Images Using a Visual-Bag-of- Words Approach. In: Remote Sens., vol. 8, no. 3, p. 231.

2016 | Weger, D.; Lowke, D.; Gehlen, C.: 3D printing of concrete structures using the selective binding method. In: 11th fib Int. PhD Symp., Tokyo.

2015 | Lowke, D. et al.: 3D printing of concrete components by selective binding with Calcium Silicate based cements. In: Ibausil 2015, Weimar, Germany, vol. 1, pp. 1113-1120, Sep. 16-18. (in German).

2015 | Düring, D.; Weiß, L.; Stefaniak, D.; Jordan, N.; Hühne, C.: Low-velocity impact response of composite laminates with steel and elastomer protective layer. In: Composite Structures 134, S. 18–26. DOI: 10.1016/j.compstruct.2015.08.001.

2015 | Hühne, C.; Ückert, C.; Steffen, O.: Entwicklung einer laminaren Flügelschale. In: Lightweight Design 8 (6), S. 32–37. DOI: 10.1007/s35725-015-0054-9.

2015 | Krauss, H.; Zeugner, T.; Zaeh, M. F.: Thermographic process monitoring in powderbed based additive manufacturing: AIP Conference Proceedings. In: Chimenti, Bond (Hg.) submitted for publication – Review of Progress in Quantitative, pp. 177–183.

2015 | Geier, M.; Fakhari, A.; Lee, T.: Conservative phasefield lattice Boltzmann model for interface tracking equation. In: Physical Review E 91.6: 063309.

2015 | Geier, M.; Schönherr; Pasquali, A.; Krafczyk, M.: The cumulant lattice Boltzmann equation in three dimensions: Theory and validation, Computers & Mathematics with Applications, 70, vol. 4,: 507-547.

2015 | Hürkamp, A.; Kaliske, M.: A model reduction approach for hyperelastic materials based on Proper Orthogonal Decomposition. In: Proc. Appl. Math. Mech., 15, pp. 203-204.

2015 | Hürkamp, A.; Tanaka, M.; Kaliske, M.: Complex step derivative approximation of consistent tangent operators for viscoelasticity based on fractional calculus. In: M. Comput Mech 56: 1055.

2015 | Breitenberger, M.; Apostolatos, A.; Philipp, B.; Wüchner, R.; Bletzinger, K.-U.: Analysis in computer aided design: Nonlinear Isogeometric B-Rep Analysis of shell structures. In: Computer Methods in Applied Mechanics and Engineering, vol. 284, pp. 401-457.

2015 | Borrmann, A.; Kolbe, T. H.; Donaubauer, A.; Steuer, H.; Jubierre, J. R.; Flurl, M.: Multi‐scale geometric‐semantic modelling of shield tunnels for GIS and BIM applications. In: Comput.-Aided Civ. Infrastruct. Eng., 30(4), pp. 263-281.

2015 | Petzold, F.; Hild, A.; Langenhan, C.; Thomä, H: BIM im architektonischen Entwurf. In: Building Information Modeling (pp. 265-270). Springer Vieweg, Wiesbaden.

2014 | Krauss, H.; Zeugner, T.; Zaeh, M. F.: Layerwise Monitoring of the Selective Laser Melting Process by Thermography. In: Physics Proc. 56.

2014 | Mensinger, M. et al.: Bestimmung der Restnutzungsdauer historischer Stahlbrücken. In: Baustatik Praxis

2014 | Hensel, J.; Nitschke-Pagel, T.; Dilger, K.; Wimpory, R.C.: Residual Stresses in Welded Steels with Longitudinal Stiffeners Determined by Neutron and X-Ray Diffraction. In: International Journal of Offshore and Polar Engineering, vol. 24, no. 4, pp. 1–8 oder pp. 278-285, (ISSN 1053-5381).

2014 | Kloft, H.; Hoyer, S.: Zum Entwerfen von Tragwerken/On designing structures. In: Stahlbau, 83(11), pp. 806-814,. doi: 10.1002/stab.201410216.

2014 | Bletzinger, K.-U.; Ramm, E.: Computational form finding and optimization. In: Shell Structures for Architecture: Form Finding and Optimization, S. Adriaenssens, P. Block, D. Veenendaal and C. Williams, eds., pp. 45-56: Routledge.

2014 | Hojjat, M.; Stavropoulou, E.; Bletzinger, K.-U.: The vertex morphing method for node-based shape optimization. In: Computer Methods in Applied Mechanics and Engineering, vol. 268, pp. 494-513.

2014 | Bletzinger, K.-U.: A consistent frame for sensitivity filtering and the vertex assigned morphing of optimal shape. In: Structural and Multidisciplinary Optimization, vol. 49, no. 6, pp. 873-895.

2014 | Kiendl, J.; Schmidt, R.; Wüchner, R.; Bletzinger, K.-U.: Isogeometric shape optimization of shells using semi-analytical sensitivity analysis and sensitivity weighting. In: Computer Methods in Applied Mechanics and Engineering, vol. 274, pp. 148- 167.

2014 | Daum, S.; Borrmann, A.; Langenhan, C.; Petzold, F.: Automated generation of building fingerprints using a spatio-semantic query language for building information models. In: eWork and eBusiness in Architecture, Engineering and Construction: ECPPM 2014, Vienna, Austria.

2014 | Ritter, F.; Schubert, G.; Geyer, P.; Borrmann, A.; Petzold, F.: Design Decision Support– Real-time Energy Simulation in the Early Design Stages. In: Proc. of the 2014 Int. Conf. on Computing in Civil and Building Engineering, Orlando, Florida, USA.

2014 | Jiang, Y.; Schaffrath, J.; Knorz, M.; Winter, S.; van de Kuilen, J.-W.: Applicability of various wood species in glued laminated timber – parameter study on delamination resistance and shear strength. In: Proceedings of the World Conference on Timber Engineering WCTE 2014.

2013 | Barth, N.; Schilde, C.; Kwade, A.: Influence of Particle Size Distribution on Micromechanical Properties of thin Nanoparticulate Coatings. In: Physics Procedia 40, 9-18.

2013 | Strege, S.; Zetzener, H.; Kwade, A.: From particle to powder properties A mesoscopic approach combining microscale experiments and X- ray microtomography. In: AIP Conference Proceedings, 1542, 839-842.

2013 | Hack, N.; Lauer, W.; Langenberg, S.; Gramazio, F.; Kohler, M.: Overcoming repetition: Robotic fabrication processes at a large scale. In: Int. J. Archit. Comput., vol. 11, no. 3.

2013 | K. Henke; S. Treml: Wood based bulk material in 3D printing processes for applications in construction. In: European Journal of Wood and Wood Products, Volume 71, Issue 1, pp 139-141, January.

2013 | Geller, S.; Uphoff, S.; Krafczyk, M.: Turbulent jet computations based on MRT and Cascaded Lattice Boltzmann models. In: Computers & Mathematics with Applications 65.12: 1956-1966.

2013 | Breitenberger, M.; Wüchner, R.; Bletzinger, K.-U.: Design and Analysis of Curved Precast Concrete Components Using CAD-based Approaches to build lightweight structures in the future. In: Beton- und Stahlbetonbau, vol. 108, no. 11, pp. 783-791.

2013 | Pittich, D.: Diagnostik fachlich-methodischer Kompetenzen. IRB Fraunhofer Verlag.

2013 | Gräfe, M.; Winter, S.: Baurechtliche Grundlagen für mehrgeschossigen Holzbau. In: P. Cheret, K. Schwaner, A. Seidel (Ed.): Urbaner Holzbau – Chancen und Potenziale für die Stadt. DOM publishers, pp. 164-169.

2013 | Langenhan, C.; Weber, M.; Liwicki, M.; Petzold, F.; Dengel, A.: Graph-based retrieval of building information models for supporting the early design stages. In: Advanced Engineering Informatics, 27(4), 413-426.

2012 | Kloft, H.: Engineering of Freeform Architecture. In: Fabricating Architecture: Selected readings in digital design and manufacturing, R. Corser, (ED),Princeton Architectural Press; pp. 110- 127, isbn-13: 97815689888894.

2012 | Dietrich, F.; Löchte, C.; Jeschke, S.; Raatz, A.: An agent-based concept for planning and control of the production of carbon fibre reinforced plastics aircraft structures with mobile production units. In: Production Engineering, vol. 6, pp. 531-539.

2012 | Dörfler, K.; Rist, F.; Rust, R.: Interlacing – An Experimental Approach of Integrating Digital and Physical Design Methods.In: Robotic Fabrication in Architecture, Art and Design, Vienna.

2012 | Rank, E.; Ruess, M.; Kollmannsberger, S.; Schillinger, D.; Düster, A.: Geometric modelling, isogeometric analysis and the Finite Cell Method. In: Computer Methods in Applied Mechanics and Engineering, vol 249-252, pp.104-115.

2012 | Schillinger, D.; Dedè, L.; Scott, M.A.; Evans, J.A.; Borden, M.J.; Rank, E.; Hughes, T.J.R.: An Isogeometric Design-through-analysis Methodo- logy based on Adaptive Hierarchical Refinement of NURBS, Immersed Boundary Methods, and T- spline CAD Surfaces. In: Computer Methods in Applied Mechanics and Engineering, vol. 249-250, pp. 116-150.

2012 | Auer, T.; Vanwyck, J.; Olsen, E.: Sustainability beyond LEED: Integrating performative delight in the built environment. In: Perspecta.

2012 | Dietsch, P.; Winter, S.: Eurocode 5 – Future Developments towards a More Comprehensive Code on Timber Structures. In: Structural Engineering International, Vol. 22, No. 2, pp. 223-231.

2012 | Langenhan, C.; Seifert, A.; Teichert, A.; Petzold, F.: searchbox–Knowledge management for architecture students. In: Proceedings of eCAADe 2012.

2011 | Zaeh M. F.; Ott M.: Investigations on heat regulation of AM-processes for metal structures. In: CIRP Annals-Manufacturing Techn. 60(1).

2011 | Stengel, T.; Lin, X.; Schießl, P.; Gehlen, C.: Tailormade Steel Fibre Reinforced Ultra High Performance Concrete – Single Fibre Pull-Out, Bending Capacity and Fracture Toughness. In: Proc. of HPFRCC 6.

2011 | Zaeh, M. F.; Ott, M.: Investigations on heat regulation of additive manufacturing processes for metal structures. In: vol. 60, CIRP Annals – Manufacturing Technology, International Academy for Production Engineering, Ed.: Elsevier, pp. 259–262.

2011 | Hürkamp, A.; Lutz, U.; Nackenhorst: Numerical investigations on the fixation of cemented and uncemented endoprostheses. In: Proc. Appl. Math. Mech., 11, pp. 89-90.

2011 | Hourani, H.; Wolters, P.; Hauck, E.; Raatz, A.; Jeschke, S.: A Conceptual Agent-Based Planning Algorithm for the Production of Carbon Fiber Reinforced Plastic Aircrafts by using Mobile Production Units. In: Int. Conf. Intelligent Robotics and Applications, pp. 366-375, Aachen.

2011 | Dietsch, P.; Winter, S.: Effect of quality control. In: Design for Robustness of Timber Structures. Shaker Verlag, pp. 59-65.

2010 | Kränkel, T.; Lowke, D.; Gehlen, C.: Semi- Flowable SCC for Horizontal Slipform Construction. In: Proc. of SCC, Montreal.

2010 | Ernst, G.; Vogler, M.; Hühne, C.; Rolfes, R.: Multiscale progressive failure analysis of textile composites. In: Composites Science and Technology 70 (1), S. 61– 72. DOI: 10.1016/j.compscitech.2009.09.006.

2010 | Zaeh, M. F.; Branner, G.: Investigations on re- sidual stresses and deformations in selective laser melting. In: Prod. Eng. Res. Devel., vol. 4, no. 1, pp. 35–45.

2010 | Ott, M.; Zaeh, M. F.: Multi-Material Processing in Additive Manufacturing. In: Bourell, Beaman et al. – Bourell, Beaman et al, pp. 195–203.

2010 | Katterfeld, A.; Gupta, A.; Luding, S.; Soetemann, B.: Discrete element study mixing in an industrial sized mixer. In: Proceedings World Congress on Particle Technology, Nürnberg, ISBN 978-3- 00-030570-2.

2010 | Dietrich, F.; Maaß, J.; Raatz, A.; Hesselbach, J.: RCA562: Control Architecture for Parallel Kinematic Robots. In: Robotic Systems for Handling and Assembly, pp. 315-331.

2008 | Düster, A.; Parvizian, J.; Yang, Z.; Rank, E.: The Finite Cell Method for three-dimensional problems of solid mechanics. In: Computer Methods in Applied Mechanics and Engineering, vol. 197(45–48), pp. 3768-3782.

2006 | Rathmann, S.; Wrege, J.; Schöttler, K.; Raatz, A.; Hesselbach, J.: Laser Scanning Technology for Micro Assembly Systems. In: 1st CIRP Int. Seminar on Assembly Sys., pp. 61-66.

2002 | Günthner, W.; Fottner, J.; Rong, O.: Empirische Entwicklung von Kenngrößen zur Auslegung von Hochleistungs-Schneckenförderern für Schuttgut. In: Technical Report, LS fml, Garching.