Additive Manufacturing in Construction
AMC TRR 277

M. Sc. Johanna Müller

Current location: TU Braunschweig
Institute: Institute for Joining and Welding
OrcidiD: 0000-0002-6148-1384

johanna.mueller@tu-braunschweig.de

was a doctoral researcher at ifs. She is responsible for the planning and execution of all scientific work, both numerical and experimental, in the framework of WAAM. This includes welding experiments, metallographic characterisation and material testing. She further analysis all data, prepares reports, presentations and publications.

Project(s)

Project A 07

Wire and Arc Additive Manufacturing (WAAM) of Complex Individualized Steel Components

Publications

2024 | Müller, J., Dastgerdi, J.N. & Hensel, J. (2024). Comparison of fatigue test results of high-strength steel DED-Arc specimens with milled and unmilled surfaces. Weld World, 68, 1187–1199. https://doi.org/10.1007/s40194-024-01687-8.

2024 | J. Müller, J. Hensel: Potential of thermography for the monitoring of DED Arc processes, Welding in the World, 68, 2024, pp. 505–513, https://doi.org/10.1007/s40194-023-01676-3.

2024 | J. Müller, C. Goulas, J. Hensel: Analysis of thermal cycles during DED-Arc of high-strength low-alloy steel and microstructural evolution, Journal of Materials Research and Technology, 2024, https://doi.org/10.1016/j.jmrt.2024.07.066

2023 | Müller, J., Hensel, J.: WAAM of structural components—building strategies for varying wall thicknesses. In: Weld World. (2023) https://doi.org/10.1007/s40194-023-01481-y

 

2022 | C. Müller, J. Müller, H. Kloft, and J. Hensel :  Design of Structural Steel Components According to Manufacturing Possibilities of the Robot-Guided DED-Arc Process. In: Buildings, vol. 12, no. 12, p. 2154.  (Dec. 2022.) doi: 10.3390/buildings12122154

 

2022 | Hensel, J., Müller, J., Scharf-Wildenhain, R. et al. :  The effects of building position on surface and fatigue of DED-arc steel components. In: Weld World. (2022) https://doi.org/10.1007/s40194-022-01431-0

 

2022 | Hensel, J.; Przyklenk, A.; Müller, J.; Köhler, M.; Dilger, K.: Surface quality parameters for structural components manufactured by DED-arc processes. In: Materials and Design 215, 2022.
DOI: 10.1016/j.matdes.2022.110438

2022 | Hensel, J.; Przyklenk, A.; Müller, J.; Köhler, M.; Dilger, K.: Surface quality parameters for structural components manufactured by DED-arc processes, In: Materials and Design 215 (2022), DOI: 10.1016/j.matdes.2022.110438

2021 | Müller, J.; Hensel, J.; Dilger, K.: Mechanical properties of wire and arc additively manufactured high-strength steel structures. In: Welding in the World, DOI: 10.1007/s40194-021-01204-1.

2021 |Müller, J., Hensel, J., Dilger, K.: Schweißtechnische Verarbeitung von hochfestem Stahl als Aufbauwerkstoff beim Wire and Arc Additive Manufacturing. In: Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering, Band 10, Clausthaler Zentrum für Materialtechnik (Hrsg.), Shaker Verlag Düren 2021 (ISBN: 978-3-8440-8021-6)

Next AMC TRR 277 members

WordPress Lightbox