AMC Administration Archives - Additive Manufacturing in Construction (AMC) TRR277 https://amc-trr277.de/tag/amc-administration/ AMC TRR 277 Fri, 15 May 2026 06:47:40 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.10 B.Sc. Cecilia S. Ahumada https://amc-trr277.de/trr277-people/ms-b-sc-cecilia-s-ahumada/ Thu, 25 Nov 2021 17:14:07 +0000 http://amc-trr277.de/?post_type=trr277-people&p=3726 Finance Manager of TRR 277

The post B.Sc. Cecilia S. Ahumada appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]>

B.Sc. Cecilia S. Ahumada

Current location: TU Braunschweig
Institute: Institute of Structural Design

trr277-finanzen@tu-braunschweig.de

Finance Manager of TRR 277

Project(s)

Central tasks
Overview Central tasks of the AMC

Central Tasks of the AMC

The post B.Sc. Cecilia S. Ahumada appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]> Prof. Dr.-Ing. Christoph Gehlen https://amc-trr277.de/trr277-people/prof-dr-ing-christoph-gehlen/ Thu, 25 Nov 2021 09:42:48 +0000 http://amc-trr277.de/?post_type=person&p=3503 Dean of TUM School of Engineering and Design, Head of cbm and leads project A02 and A03. He instructs and advises the academic staff regarding additive manufacturing and concrete technological questions. He is responsible for the coordination and quality control of all work of cbm.
Untill Oct. 2021 he was the co-spokesperson of the TRR 277. He then became Dean of TUM School of Engineering and Design and handed over the tasks of Co-Speaker to Kathrin Dörfler.

The post Prof. Dr.-Ing. Christoph Gehlen appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]>

Prof. Dr.-Ing. Christoph Gehlen

AMC Board
Project leader
Head of Gender Equality
Current location: TU München
Institute: Chair of Materials Science and Testing
OrcidiD: 0000-0002-1214-3960

gehlen@tum.de

Dean of TUM School of Engineering and Design, Head of cbm and leads project A02 and A03. He instructs and advises the academic staff regarding additive manufacturing and concrete technological questions. He is responsible for the coordination and quality control of all work of cbm.

Project(s)

Project A 02

Particle-Bed 3D Printing by Selective Cement Paste Intrusion (SPI) – Particle Surface Functionalisation, Particle Synthesis and Integration of WAAM Reinforcement

Project A 03

Extrusion of Near-Nozzle Mixed Concrete –Individually Graded in Density and in Rate of 3D Fibre Reinforcement

Publications

2026| C.M. Hechtl, S. Segl, T.Kränkel, C. Gehlen

Rheologica Acta, 65(5), pp. 475-486 https://doi.org/10.1007/s00397-026-01562-x

Data |  Zenodo, 2025                            https://doi.org/10.5281/zenodo.17983806

2026| C.M. Hechtl, M. Dahlenburg, F. Bos, T. Kränkel, C. Gehlen

Additive Manufacturing Letters, 17, 100353 https://doi.org/10.1016/j.addlet.2025.100353

 

2026 | S. Cheng, B. Grimm, M. Unterreiner, M. Hechtl, M. Dahlenburg, T. Kränkel, J. Fottner, C. Gehlen, F. Bos: Properties of the transition region in 3D printed functionally graded concrete through Near Nozzle Binder-Aggregate Mixing (NNBAM) Construction and Building Materials, Volume 520. 2026, https://doi.org/10.1016/j.conbuildmat.2026.145990

Data | Zenodo, 2026, https://doi.org/10.5281/zenodo.18899746

2024 |E. Krakovska, D. Briels, A. Straßer, T. Kränkel, T. Auer, C. Gehlen, P. D´Acunto, K. Dörfler: Functionally Hybridised Lightweight Concrete Components: Monolithic Building Construction Using Selective Paste Intrusion Digital Concrete 2024, 2024, https://doi.org/10.1007/978-3-031-70031-6_41

2024 | A. Straßer, D. Briels, T. Kränkel, C. Gehlen, T. Auer: Selective Paste Intrusion – An Additive Manufacturing Technique to produce customized Building Components with enhanced Thermal Insulating Performance HiPerMat 2024, 2024, https://doi.org/10.17170/kobra-202402059519

2025 | A.Straßer, F.Riegger, T. Kränkel, C. Gehlen: Additive Manufacturing of Steel-Reinforced Concrete by Combination of Selective Paste Intrusion and Wire Arc Additive Manufacturing: Impact of Heat Generated by WAAM on Bond Behavior of the Reinforcement Materials, 2025, https://doi.org/10.3390/ma18235455

Data |Zenodo, 2025, https://doi.org/10.5281/zenodo.16562375

2024 | A.Straßer, A. Haynack, T. Kränkel, C. Gehlen: Additive manufacturing by the selective paste intrusion: Effect of the distance of the print nozzle to the particle bed on the print quality Construction and Building Materials, Volume 449, 2024, https://doi.org/10.1016/j.conbuildmat.2024.138274

Data |Zenodo, 2024, https://doi.org/10.1016/j.conbuildmat.2024.138274

2024 | C. Thiel, C.M. Hechtl, C. Gehlen, T. Kränkel: Sustainability Potential of Additive Manufactured Concrete Structures – Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall Proceedings of the Fourth RILEM International Conference on Concrete and Digital Fabrication, DC 2024, RILEM Bookseries, vol. 53, Springer, Cham, 2024. https://doi.org/10.1007/978-3-031-70031-6_2

2023 | A. Straßer, F. Riegger, L.D Hamilton, T. Kraenkel, C. Gehlen, M.F. Zaeh, A. Kwade: Selective Paste Intrusion: Integration of reinforcement by WAAM — Concept and current research with special attention to cooling strategies. Construction and Building Materials 2023, 406, 133236.
https://doi.org/10.1016/j.conbuildmat.2023.133236

2023 | K. Tischner, S. Rappl, F. Riegger, A. Strasser, K. Osterminski, T. Kraenkel, S. Baehr, M.F. Zaeh, C. Gehlen: Bond Behavior of WAAM Reinforcements in Comparison to Conventional Steel Reinforcements. In: Constr. Mater. 2023, 3, 217–232.
https://doi.org/10.3390/constrmater3020014

2023 | A. Straßer, T. Kränkel. C. Gehlen: Integrating Wire Arc Additive Manufacturing into Selective Paste Intrusion for Reinforced Concrete Elements: Effect of Temperature on the Mechanical Performance. In: ibausil 2023

2023 | A. Straßer, A. Haynack, T. Kränkel, C. Gehlen: Additive Manufacturing by the Selective Paste Intrusion Method: Effect of the Distance of the Print NozzIe to the Particle bed on the Print Quality. In: Preprints 2023, 2023030236.
https://doi.org/10.20944/preprints202303.0236.v1

2022 | Straßer, A.; Weger, D.; Matthäus, Carla; Kränkel, T.; Gehlen, C.: Combining Wire and Arc Additive Manufacturing and Selective Paste Intrusion for Additively Manufactured Structural Concrete. In: Visions and Strategies for Reinforcing Additively Manufactured Concrete Structures 61-72 (2022)

2022 | Straßer, A.; Matthäus, Carla; Weger, D.; Kränkel, T.; Gehlen, C.: Selective Paste Intrusion: Stability of Cement Paste Mixtures Towards Changing Ambient Temperature. In: Third RILEM International Conference 296–301 (2022)

2022 | Lowke, D.; Gehlen, C.; Kloft, H.; Freund, N.; Matthäus, C.: Bewehrungskonzepte beim 3D-Druck von Konstruktionsbeton. In: BfT International, 02.2021, S. 92.

2022 | Lowke, D.; Mai, I.; Keita, E.; Perrot, A.; Weger, D.; Gehlen, C.; Herding, F.; Zuo, Wenqiang; Roussel, N.: Material-process interactions in particle bed 3D printing and the underlying physics. In: Cement and Concrete Research, CCR 156 (106748), 2022
https://doi.org/10.1016/j.cemconres.2022.106748

2021 | Lowke, D.; Gehlen, C.; Kloft, H.; Freund, N.; Matthäus, C.: Bewehrungskonzepte beim 3D-Druck von Konstruktionsbeton. In: BfT International, 02.2021, S. 92, 2021.

2021 | Alaimo, G.; Carraturo, M.; Korshunova, N.; Kollmannsberger, S.: Numerical evaluation of high cycle fatigue life for additively manufactured stainless steel 316L lattice structures. In: Material Design and Processing Communication 3 (4), pp. e249, Wiley, 2021. – DOI: 10.1002/mdp2.249.

2021 | Gehlen, C.; Lowke, D.; Weger, D.; Dreßler, I.: Dauerhaftigkeit – Potenzial additiver Fertigung und Performance im Vergleich zu konventioneller Fertigung. In: BfT International, 02.2021, S. 94, 2021.

2021 | Weger, D.; Pierre, A.; Perrot, A.; Kränkel, T.; Lowke, D.; Gehlen, C.: Penetration of Cement Pastes into Particle-Beds: A Comparison of Penetration Models. In: Materials 2021, 14, 389. – DOI: https://doi.org/10.3390/ma14020389.

2021 | Weger, D.; Gehlen, C.: Particle-Bed Binding by Selective Paste Intrusion—Strength and Durability of Printed Fine-Grain Concrete Members. In: Materials 2021, 14, 586. – DOI: doi.org/10.3390/ma14030586.

2021 | Kloft, H., Gehlen, C., Dörfler, K., Hack, N., Henke, K., Lowke, D., Mainka, J. and Raatz, A. (2021), TRR 277: Additive Fertigung im Bauwesen. In: Bautechnik, 98: 222-231. – DOI: https://doi.org/10.1002/bate.202000113.

2020 | Matthäus, C.; Kofler, N.; Kränkel, T.; Weger, D.; Gehlen, C.: Interlayer Reinforcement Combined with Fiber Reinforcement for Extruded Lightweight Mortar Elements. In: Materials 2020, 13, 4778, 2020. – DOI: https://doi.org/10.3390/ma13214778.

2020 | Weger, D.; Baier, D.; Straßer, A.; Prottung, S.; Kränkel, T.; Bachmann, A.; Gehlen, C.; Zäh, M.: Reinforced Particle-Bed Printing by Combination of the Selective Paste Intrusion Method with Wire and Arc Additive Manufacturing – A First Feasibility Study. In: RILEM Bookseries 28, pp. 978–987, 2020. – DOI: https://doi.org/10.1007/978-3-030-49916-7_95.

2020 | Lowke, D.; Talke, D.; Dreßler, I.; Weger, D.; Gehlen, C.; Ostertag, C.; Rael, R.: Particle bed 3D printing by selective cement activation – Applications, material and process technology. In: Cement and Concrete Research 134,2020. – DOI: https://doi.org/10.1016/j.cemconres.2020.106077.

The post Prof. Dr.-Ing. Christoph Gehlen appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]> Julia Hinderink, M.A. https://amc-trr277.de/trr277-people/julia-hinderink-m-a/ Mon, 27 Apr 2026 08:20:27 +0000 https://amc-trr277.de/?post_type=trr277-people&p=8492 She is responsible for science communication, technology transfer and industry collaboration

The post Julia Hinderink, M.A. appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]>

Julia Hinderink, M.A.

Current location: TU München
Institute: Professorship of Digital Fabrication

julia.hinderink@tum.de

Julia Hinderink is an architect responsible for science communication, technology transfer and industry collaboration within the TRR277. Since 2021, she has worked at the Technical University of Munich, developing and leading interdisciplinary entrepreneurship and transfer formats at the intersection of academia, innovation, and industry. With a background in architecture and architectural communication, she brings extensive experience in curating and moderating international symposia, publications and strategic network formats.

Project(s)

Central tasks
Overview Central tasks of the AMC

Central Tasks of the AMC

The post Julia Hinderink, M.A. appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]> Prof. Dr.-Ing. Harald Kloft https://amc-trr277.de/trr277-people/prof-dr-ing-harald-kloft/ Thu, 25 Nov 2021 09:52:43 +0000 http://amc-trr277.de/?post_type=person&p=3519 leads the scientific staff in the orientation and execution of the design process creation and supports them in an advisory capacity in the creation of test geometries and demonstrators. He is responsible for the content and organisational coordination of all work on the part of ITE.
He instructs the research engineer at ITE in the conceptual structure, execution and evaluation of the theoretical and experimental research work.
He is the spokesperson of the TRR 277.

The post Prof. Dr.-Ing. Harald Kloft appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]>

Prof. Dr.-Ing. Harald Kloft

AMC Board
Project leader
Current location: TU Braunschweig
Institute: Institute of Structual Design

ite@tu-bs.de

Prof. Dr.-Ing. Harald Kloft leads the scientific staff in the orientation and execution of the design process creation and supports them in an advisory capacity in the creation of test geometries and demonstrators. He is responsible for the content and organisational coordination of all work on the part of ITE.
He instructs the research engineer at ITE in the conceptual structure, execution and evaluation of the theoretical and experimental research work.
He is the spokesperson of the TRR 277. He serves as contact person for the DFG and represents the TRR 277 externally. Internally, Prof. Kloft is chairman of the executive board of TRR 277 as well as of the project leaders and the general assembly. He is responsible for the management and settlement of funds and for the convening of board meetings and general meetings in cooperation with 3). Additionally, he is involved in the coordination between the research projects and oversees the aims of TRR 277. Prof. Kloft is also responsible, assisted by 2), for the coordination of general public relation matters in close cooperation with the communication facilities TUBS Communications and Press Service (TUBS-CPS) and the TUM Corporate Communications Center (TUM CCC).

Project(s)

Project A 04

Integrated Additive Manufacturing Processes for Reinforced Shotcrete 3D Printing (SC3DP) Elements with Precise Surface Quality

Project A 07

Wire and Arc Additive Manufacturing (WAAM) of Complex Individualized Steel Components

Project A 10

Earth Additive Manufacturing (EAM) – Material and Process Combinations for AM with Earth-based Materials

Project C 05

Jointing Principles for Combination of Concrete Elements Produced by Different Additive Manufacturing Processes

Central tasks
Overview Central tasks of the AMC

Central Tasks of the AMC

Publications

2026 |B. Sawicki, R. Dörrie, H. Kloft

Preliminary Assessment of Ultrasonic Pulse Velocity for Quality Control of Shotcrete 3D-Printed Concrete

Buildings, 16, 3594 https://doi.org/10.3390/buildings16183594

 

2025 | Y. Xiao, A. Vandenberg, D. Lowke, I. Mai, P. D’Acunto, H. Kloft, N. Hack

Automation in Construction, vol. 179 https://doi.org/10.1016/j.autcon.2025.106440

Data | Zenodo, 2025                      https://doi.org/10.5281/zenodo.17943868

2025 | Y. Xiao, N. Hack, H. Kloft, D. Lowke, I. Mai, P. D’Acunto

Additive Manufacturing, vol. 103 https://doi.org/10.1007/s00466-026-02849-9

Data | Zenodo, 2025                       https://doi.org/10.5281/zenodo.17942354

2025 |B. Sawicki, N. Hack, H. Kloft

Visions and Strategies for Reinforcing Additively Manufactured Constructions 2025 https://doi.org/10.52825/ocp.v7i.2777

2025 | L. Ledderose, H. Kloft: First Investigations on WAAM-Printed Adhesive Sockets for Reinforcement Connections Open Conference Proceedings, 7, 2025, https://doi.org/10.52825/ocp.v7i.2788

Data | Zenodo, 2026, https://doi.org/10.5281/zenodo.18394837

2025 | R. Dörrie, L. Lachmayer, A. Baghdadi, M. David, K. Dröder, A. Raatz, H. Kloft: Investigation on process guidelines and geometric capabilities for robust shotcrete 3D printing, Materials & Design, 2025, https://doi.org/10.1016/j.matdes.2025.115050

Data | LeoPARD, 2025, https://doi.org/10.24355/dbbs.084-202510271126-0

2024|A. Perrot, Y. Jacquet, J.F. Caron, R. Mesnil, N. Ducoulombier, V. De Bono, J. Sanjayan, S. Ramakrishnan, H. Kloft, J. Gosslar, S. Muthukrishnan: Snapshot on 3D printing with alternative binders and materials: Earth, geopolymers, gypsum and low carbon concrete, Cement and Concrete Research Volume 185, 2024, https://doi.org/10.1016/j.cemconres.2024.107651

2024|L. Gebhard, J. Mata-Falcon, R. Ammann, N. Preßmair, B. Kromoser, C. Menna, A. Baghdadi, H. Kloft, M. Gabriel, M. Walch, W. Kaufmann: Enhancing structural efficiency with digital concrete – Principles, opportunities and case studies, Cement and Concrete Research Volume 185, 2024, https://doi.org/10.1016/j.cemconres.2024.107645

2024|H. Kloft, B. Sawicki, F. Bos, R. Dörrie, N. Freund, S. Gantner, L. Gebhard, N. Hack, E. Ivaniuk, J. Kruger, W. Kaufmann: Interaction of reinforcement, process, and form in Digital Fabrication with Concrete, Cement and Concrete Research Volume 186, 2024, https://doi.org/10.1016/j.cemconres.2024.107640

2024|D. Lowke, A. Anton, R. Buswell, S.E. Jenny, R. J. Flatt, E.L. Fritschi, N. Hack, I. Mai, M. Popescu, H. Kloft: Digital fabrication with concrete beyond horizontal planar layers, Cement and Concrete Research Volume 186, 2024, https://doi.org/10.1016/j.cemconres.2024.107663

2025 | A. Keune, Z. Simsic, H.Kloft, k. Dörfler: AMC Edu:Lab Design to Learn About Additive Manufacturing in Construction, Proceedings of the 24th Interaction Design and Children, 2025, . https://doi.org/10.1145/3713043.3728843

Data | Zenodo, 2026, https://doi.org/10.5281/zenodo.20719478

2026 | H.Eichler, B.Sawicki, H.Kloft: Hybrid wire and arc additive manufactured I-section beams: assessment of material efficiency and carbon footprint, Arch. Civ. Mech. Eng., 2026, https://doi.org/10.1007/s43452-025-01380-7

2025 | R. Dörrie, L. Lachmayer, A. Baghdadi, M. David, K. Dröder, A. Raatz, H. Kloft: Investigation on process guidelines and geometric capabilities for robust shotcrete 3D printing Materials & Design, 2025, 115050, https://doi.org/10.1016/j.matdes.2025.115050

Data |LeoPARD, 2025, https://doi.org/10.24355/dbbs.084-202510271126-0

2024 | R. Dörrie, M. David, N. Freund, D. Lowke, K. Dröder, H. Kloft: Surface Processing of Shotcrete 3D Printed Concrete Elements Using a Rotating Trowel Disc–Influence of Timing on Resulting Surface Quality RILEM International Conference on Concrete and Digital Fabrication, pp. 397-404, Cham: Springer Nature Switzerland.

2024 | R. Dörrie, H. Kloft, B. Sawicki, N. Freund, D. Lowke: Automated Reinforcement Integration in Shotcrete 3D Printing Through Green State Milling RILEM International Conference on Concrete and Digital Fabrication, pp. 319-326, Cham: Springer Nature Switzerland, https://doi.org/10.1007/978-3-031-70031-6_37

Data | Photographs of cross-section of automated reinforcement integration in Shotcrete 3D Printing through green state milling, LeoPARD, 2024, https://doi.org/10.24355/dbbs.084-202403201419-0

2024 | A. Baghdadi, L. Ledderose, H. Kloft: Application of Water Jet Cutting and Optimization Problems in the Development of a New Concrete Construction System, Proceedings of the IASS 2024 Symposium “Redefining the Art of Structural Design”, Zurich, 26–30 August 2024, https://app.iass2024.org/files/IASS_2024_Paper_1.pdf

Data | LeoPARD, 2025, https://leopard.tu-braunschweig.de/receive/dbbs_mods_00079020

2024 | A. Baghdadi, L. Ledderose, H. Kloft: Proposing New Standard and ANFIS Calculation Approaches for Structural Optimization of Multi-Floor Buildings: A Hybrid Numerical and Soft Computing Method, Buildings, 14(10), 3298, 2024, , https://doi.org/10.3390/buildings14103298.

Data | LeoPARD, 2025, https://leopard.tu-braunschweig.de/receive/dbbs_mods_00079018.

2024 | A. Baghdadi, F. Salehi Amiri, C. Jantzen, H. Kloft: Integration of Augmented Reality for Enhanced Visualization and Analysis in Bridge Engineering, Towards Real-Time Optimization in Structural and Architectural Design, Proceedings of the IASS 2024 Symposium “Redefining the Art of Structural Design”, Zurich, 26–30 August 2024, https://app.iass2024.org/files/IASS_2024_Paper_17.pdf.

Data | LeoPARD, 2024, https://leopard.tu-braunschweig.de/receive/dbbs_mods_00079021

2024 | A. Baghdadi, L. Ledderose, H. Kloft: Proposal and parametric investigations of square steel tubes as post-tensioned connectors for linear-shaped precast concrete elements, Structures, Vol. 69, Elsevier, 2024, https://doi.org/10.1016/j.istruc.2024.107295.

Data | LeoPARD, 2024, https://leopard.tu-braunschweig.de/receive/dbbs_mods_00079019

2024 |J. Fleckenstein, B. Knychalla, D. Briels, A. Baghdadi, G. Placzek, F. Herding, P. Schwerdtner, T. Auer, D. Lowke, H. Kloft, K. Dörfler, P. Ayres, M. Thomson , R. Sheil, M. Skavara: BREUER X AM: FUNCTIONAL HYBRIDISATION IN CONCRETE BUILDING ENVELOPE ELEMENTS THROUGH ADDITIVE MANUFACTURING Fabricate 2024: Creating Resourceful Futures, 2024, https://doi.org/10.2307/jj.11374766.29

 

2024 |J. Fleckenstein, B. Knychalla, D. Briels, A. Baghdadi, G. Placzek, F. Herding, P. Schwerdtner, T. Auer, D. Lowke, H. Kloft, K. Dörfler, P. Ayres, M. R. Thomsen, B. Sheil, M. Skavara: BREUER X AM: Functional hybridisation in concrete building envelope elements through additive manufacturing, Fabricate 2024: Creating Resourceful Futures, UCL Press, 2024, 196–205, https://doi.org/10.2307/jj.11374766.29

2024 | J. Unglaub, M. Müggenburg, H. Jahns, H. Kloft, J. Hensel, K. Thiele: Towards a Digital Twin to Enable First Time Right DED-Arc Components, Fourth RILEM International Conference on Concrete and Digital Fabrication Munich, RILEM Bookseries, vol 53, Springer, 2024, https://doi.org/10.1007/978-3-031-70031-6 51

2024 | L. Lachmayer, J. Quantz, H. Heeren, T. Recker, R. Dörrie, H. Kloft, A. Raatz: A spatial multi-layer control concept for strand geometry control in robot-based additive manufacturing processes Fourth RILEM International Conference on Concrete and Digital Fabrication Munich, RILEM Bookseries, vol 53, Springer, 2024, https://doi.org/10.1007/978-3-031-70031-6_14

2024 | L. Lachmayer, T. Recker, L. Dittrich, R. Dörrie, H. Kloft, A. Raatz: Inline image-based reinforcement detection for concrete additive manufacturing processes using a convolutional neural network Proceedings of the 41st ISARC,2024 https://doi.org/10.22260/ISARC2024/0007

Data | ReinforcementInFoam_Image_Dataset, Zenodo, 2025, https://doi.org/10.5281/zenodo.15096976.

2024 | J. Hitzegrad, L. Brohmann, F. Herding, K. Pfennings, S. Jonischkies, E. Scharnbeck, J. Mainka, I. Mai, C. Windt, H. Kloft, A. Wehrmann, D. Lowke, N. Goseberg: Surfaces of coastal biogenic structures: exploiting advanced digital design and fabrication strategies for the manufacturing of oyster reef and mussel bed surrogates, Front. Mar. Sci., 11:1395025, 2024, https://doi.org/10.3389/fmars.2024.1395025

2023 | R. Dörrie, N. Freund, E. Herrmann, A. Baghdadi, I., Mai, F. Galli, M. David, K. Dröder, D. Lowke, H. Kloft: Automated force-flow-oriented reinforcement integration for Shotcrete 3D Printing. In: Automation in Construction, 155, p.105075, https://doi.org/10.1016/j.autcon.2023.105075
https://doi.org/10.3390/buildings12111806

2022 | R. Dörrie, V. Laghi, L. Arrè, G. Kienbaum, N. Babovic, N. Hack, H. Kloft: Combined Additive Manufacturing Techniques for Adaptive Coastline Protection Structures. In: Buildings, vol. 12, no. 11, p. 1806, 2022.
https://doi.org/10.3390/buildings12111806

2022 | R. Dörrie, and H. Kloft: Force-Flow compliant robotic path planning approach for reinforced concrete elements. In Proc. Int. Conf. on Concrete and Digital Fabrication, 2022, pp. 370-375.

2022 | C. Müller, J. Müller, H. Kloft, and J. Hensel :  Design of Structural Steel Components According to Manufacturing Possibilities of the Robot-Guided DED-Arc Process. In: Buildings, vol. 12, no. 12, p. 2154.  (Dec. 2022.) doi: 10.3390/buildings12122154

 

2022 | Lachmayer L., Dörrie R., Kloft H., Raatz A.: Process Control for Additive Manufacturing of Concrete Components. In: RILEM Bookseries Vol. 37, pp. 351-356, (3rd RILEM International Conference on Concrete and Digital Fabrication (DC 2022), England), (6 pages), https://doi.org/10.1007/978-3-031-06116-5_52

2022 | Lowke, D.; Gehlen, C.; Kloft, H.; Freund, N.; Matthäus, C.: Bewehrungskonzepte beim 3D-Druck von Konstruktionsbeton. In: BfT International, 02.2021, S. 92.

2022 | Lanwer, J.-P.; Weigel, H.; Baghdadi, A.; Empelmann, M.; Kloft, H.: Jointing Principles in AMC—Part 1: Design and Preparation of Dry Joints. In: Applied Sciences, 2022, 12, 4138
https://doi.org/10.3390/app12094138

2022 | Buswell, R. A.; Bos, F. P.; Leal da Silva, W. R.; Hack, N.; Kloft, H.; Lowke, D.; Freund, N.; Fromm, A.; Dini, E.; Wangler, T.; Lloret-Fritschi, E.; Schipper, R.; Mechtcherine, V.; Perrot, A.; Vasilic, K.; Roussel, N.: Digital Fabrication with Cement-Based Materials: Process Classification and Case Studies. In: Roussel, N. and Lowke, D. (2022). Digital Fabrication with Cement-Based Materials (Reports 36). RILEM State-of-the-Art. DOI: https://doi.org/10.1007/978-3-030-90535-4_2

2022 | Asprone, D.; Menna, C.; Bos, F.; Mata-Falcón, J.; Ferrara, L.; Auricchio, F.; Cadoni, E.; Cunha, V. M. C. F.; Esposito, L.; Fromm, A.; Grünewald, S.; Kloft, H.; Mechtcherine, V.; Naidu Nerella, V.; Schipper, R.: Structural Design and Testing of Digitally Manufactured Concrete Structures. In: Roussel, N. and Lowke, D. (2022). Digital Fabrication with Cement-Based Materials (Reports 36). RILEM State-of-the-Art. DOI: https://doi.org/10.1007/978-3-030-90535-4_6

2021 | Mai, I.; Brohmann, L.; Freund, N.; Gantner, S.; Kloft, H.; Lowke, D.; Hack, N.: Large Particle 3D Concrete Printing – A Green and Viable Solution. In: Materials, 14, 6125, 2021. DOI: https://doi.org/10.3390/ma14206125.

2021 | Mechtcherine, V.; Buswell, R.; Kloft, H.; Bos, F. P.; Hack, N.; Wolfs, R.; Sanjayan, J.; Nematollahi, B.; Ivaniuk, E.; Neef, T.: Integrating reinforcement in digital fabrication with concrete: A review and classification framework. In: Cement and Concrete Composites, 119, 2021. – DOI: https://doi.org/10.1016/j.cemconcomp.2021.103964.

2021 | Lachmayer, L.; Dörrie, R.; Kloft,H.; Raatz, A.: Automated shotcrete 3D printing – Printing interruption for extended component complexity. In: ISARC, 2021.

2021 | Baghdadi, A.; Doerrie, R.; Kloft, H.: New calculation approach for selecting and orienting the reinforcing material for robotic concrete manufacturing. In: Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures Inspiring the Next Generation. 23 – 27 August, Guilford, UK, 2021.

2021 | Baghdadi, A.; Meshkini, A.; Kloft, H.: Parametric design of in-plane concrete dry joints by FE method and Fuzzy logic toward utilising additive manufacturing technique. In: Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures Inspiring the Next Generation. 23 – 27 August, Guilford, UK, 2021.

2021 | Baghdadi, A.; Meshkini, A.; Kloft, H.: Inspiration of Interlocking Wooden Puzzles for Precast Concrete Construction Conceptual Design of Structures. In: International fib Symposium, September 16-18, Switzerland, 2021.

2021 | Lowke, D.: Injection 3D concrete printing in a carrier liquid – Underlying physics and applications to lightweight space frame structures. In: Cement and Concrete Composites, 2021. – DOI: https://doi.org/10.1016/j.cemconcomp.2021.104169.

2021 | Lowke, D.; Gehlen, C.; Kloft, H.; Freund, N.; Matthäus, C.: Bewehrungskonzepte beim 3D-Druck von Konstruktionsbeton. In: BfT International, 02.2021, S. 92, 2021.

2021 | Alaimo, G.; Carraturo, M.; Korshunova, N.; Kollmannsberger, S.: Numerical evaluation of high cycle fatigue life for additively manufactured stainless steel 316L lattice structures. In: Material Design and Processing Communication 3 (4), pp. e249, Wiley, 2021. – DOI: 10.1002/mdp2.249.

2021 | Empelmann, M.; Kloft, H.: Practical solutions in additive manufacturing – Innovative jointing principles. In: BFT International 87, Issue 2, p. 93.

2021 | Kloft, H., Gehlen, C., Dörfler, K., Hack, N., Henke, K., Lowke, D., Mainka, J. and Raatz, A. (2021), TRR 277: Additive Fertigung im Bauwesen. In: Bautechnik, 98: 222-231. – DOI: https://doi.org/10.1002/bate.202000113.

2020 | Hack, N.; Kloft, H.; Lowke, D.: Additive Fertigung im Bauwesen: 3D-Betondruck als eine Schlüsseltechnologie für die Digitalisierung der Bauwirtschaft. In: Ingenieurbaukunst 2020 – Made in Germany, Jahrbuch der Bundesingenieurkammer, S. 178-183, 2020.

2020 | Buswell, R.; Kinnell, P.; Xu, J.; Hack, N.; Kloft, H.; Maboudi, M.; Gerke, M.; Massin, P.; Grasser, G.; Wolfs, R.; Bos, F.: Inspection Methods for 3D Concrete Printing. In: RILEM Bookseries 28, pp. 790-803, 2020. – DOI: https://doi.org/10.1007/978-3-030-49916-7_78.

2020 | Kloft, H.; Krauss, H.-W.; Hack, N.; Herrmann, E.; Neudecker, S.; Varady, P.; Lowke, D.: Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP). In: Cement and Concrete Research 134, 2020. – DOI: https://doi.org/10.1016/j.cemconres.2020.106078.

2020 | Kloft, H.; Empelmann, M.; Hack, N.; Herrmann, E. Lowke, D.: Bewehrungsstrategien für den Beton-3D-Druck. In: Beton- und Stahlbetonbau 115, 2020. – DOI: https://onlinelibrary.wiley.com/doi/epdf/10.1002/best.202000032.

2020 | Baghdadi, A.; Heristchian, M.; Ledderose, L.; Kloft, H.: Experimental and numerical assessment of new precast concrete connections under bending loads. In: Engineering Structures 212, ELSEVIER, 2020. – DOI: https://doi.org/10.1016/j.engstruct.2020.110456.

2020 | Hack, N.; Dressler, I.; Brohmann, L.; Gantner, S.; Lowke, D.; Kloft, H.: Injection 3D Concrete Printing (I3DCP): Basic Principles and Case Studies. In: Materials 2020, 13, 1093, 2020. – DOI: https://doi.org/10.3390/ma13051093.

The post Prof. Dr.-Ing. Harald Kloft appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]> Dr.-Ing. Jeldrik Mainka https://amc-trr277.de/trr277-people/dr-ing-jeldrik-mainka/ Thu, 25 Nov 2021 17:13:42 +0000 http://amc-trr277.de/?post_type=trr277-people&p=3724 General Manager / administrative coordinator. He is organizing the day-to-day management of the SFB TRR 277 AMC, supports the Speaker and Co- speaker such as the AMC Board in the coordination of the TRR 277.
He is reporting to the AMC Board and is head of the AMC Business Office (AMC-Geschäftsstelle).

The post Dr.-Ing. Jeldrik Mainka appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]>

Dr.-Ing. Jeldrik Mainka

Current location: TU Braunschweig
Institute: Institute of Structural Design
OrcidiD: 0000-0002-8941-5661

trr277-gm@tu-braunschweig.de

General Manager / administrative coordinator. He is organizing the day-to-day management of the SFB TRR 277 AMC, supports the Speaker and Co- speaker such as the AMC Board in the coordination of the TRR 277.

He is reporting to the AMC Board and is head of the AMC Business Office (AMC-Geschäftsstelle).

Project(s)

Central tasks
Overview Central tasks of the AMC

Central Tasks of the AMC

Publications

2024 | J. Hitzegrad, L. Brohmann, F. Herding, K. Pfennings, S. Jonischkies, E. Scharnbeck, J. Mainka, I. Mai, C. Windt, H. Kloft, A. Wehrmann, D. Lowke, N. Goseberg: Surfaces of coastal biogenic structures: exploiting advanced digital design and fabrication strategies for the manufacturing of oyster reef and mussel bed surrogates, Front. Mar. Sci., 11:1395025, 2024, https://doi.org/10.3389/fmars.2024.1395025

2021 | Kloft, H., Gehlen, C., Dörfler, K., Hack, N., Henke, K., Lowke, D., Mainka, J. and Raatz, A. (2021), TRR 277: Additive Fertigung im Bauwesen. In: Bautechnik, 98: 222-231. – DOI: https://doi.org/10.1002/bate.202000113.

The post Dr.-Ing. Jeldrik Mainka appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]> Ms. Yonca Taube https://amc-trr277.de/trr277-people/ms-yonca-taube/ Thu, 25 Nov 2021 17:15:20 +0000 http://amc-trr277.de/?post_type=trr277-people&p=3732 She supports the AMC in all administrative tasks.

The post Ms. Yonca Taube appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]>

Ms. Yonca Taube

Current location: TU Braunschweig
Institute: Institute of Structural Design

ite@tu-braunschweig.de

She supports the AMC in all administrative tasks.

Project(s)

Central tasks
Overview Central tasks of the AMC

Central Tasks of the AMC

The post Ms. Yonca Taube appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]> M. Sc. Janna Vollrath https://amc-trr277.de/trr277-people/m-sc-janna-vollrath/ Fri, 24 Feb 2023 10:34:41 +0000 https://amc-trr277.de/?post_type=trr277-people&p=6470 Chief Collaborative Demonstrator Execution Coordinator 

The post M. Sc. Janna Vollrath appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]>

M. Sc. Janna Vollrath

Current location: TU München
Institute: Professorship of Digital Fabrication

janna.vollrath@tum.de

Chief Collaborative Demonstrator Execution Coordinator

Janna Vollrath is an architect and research associate at the Professorship of Digital Fabrication at Technische Universität München. At the AMC, her main focus is the coordination and organisation of the final demonstrators of the sub-projects. She also coordinated the Collaborative Demonstrator Projects during the first funding period. Her research focuses on digital design methods and the robotic fabrication of renewable materials, as well as their transferability to the construction industry.

Project(s)

Central tasks
Overview Central tasks of the AMC

Central Tasks of the AMC

The post M. Sc. Janna Vollrath appeared first on Additive Manufacturing in Construction (AMC) TRR277.

]]>