AMC Administration
Publications from B.Sc. Cecilia S. Ahumada
She has been appointed as co-coordinator of The Collaborative Research Center Transregio 277, Additive Manufacturing in Construction. Her research focus is the interface of structural engineering, architecture, and polymer science in order to adapt new technologies and materials in construction technology and design.
Publications from Dr.-Ing. Hastia Asadi
PR & Communication Coordinator. She is in charge of the public relations and communication of the SFB TRR 277 AMC and presents the AMC to a broad interested public. She is part of the AMC office.
Publications from Meike Bährens M.A.
leads the scientific staff in the conception and execution of the research, and in questions of validation of the proposed methods. She is also responsible for the coordination of the cooperating research projects in the TRR 277. She is the Co-Spokesperson of the TRR 277. Dörfler supports Kloft as contact person for the DFG, in general public relation matters and also in representing the TRR 277 externally. Internally, Dörfler assists Kloft in the coordination between the research projects, as well as in the decisions on the financing of research tasks in the TRR 277.
Project(s)
Principles of Mobile Robotics for Additive Manufacturing in Construction
Central Tasks of the AMC
Publications from Prof. Dr. sc. ETH Kathrin Dörfler
Publications
2023 | G. Dielemans, L. Lachmayer, N. Kadher, N. Hack, A. Raatz, K. Dörfler: Robotic Repair: In-place 3D Printing for Repair of Building Components using a Mobile Robot. In: 4th International Conference on 3D Construction Printing (4th 3DcP), Singapore; Springer.
2022 | Dielemans, G.; Lachmayer, L.; Recker, T.; Atanasova, L.; Hechtl, M.; Matthäus, C.; Raatz, A.; Dörfler, K.: Mobile Additive Manufacturing: A Case Study of Clay Formwork for Bespoke in Situ Concrete Construction. In: Buswell, R., Blanco, A., Cavalaro, S., Kinnell, P. (eds) Third RILEM International Conference on Concrete and Digital Fabrication. DC 2022. RILEM Bookseries, vol 37. Springer, Cham.
https://doi.org/10.1007/978-3-031-06116-5_3
2022 | Dörfler, K.; Dielemans, G.; Lachmayer, L.; Recker, T.; Raatz, A.; Lowke, D.; Gerke, M.: Additive Manufacturing using mobile robots: Opportunities and challenges for building construction. In: Cem. Concr. Res., vol. 158, Aug. 2022, doi: 10.1016/J.CEMCONRES.2022.106772.
2022 | Lachmayer, Recker, T.; Dielemans, G.; Dörfler, K.; Raatz, A.: Autonomous sensing and localization of a mobile robot for multi-step additive manufacturing in construction. In: 24th International society for photogrammetry and remote sensing, 2022
https://doi.org/10.5194/isprs-archives-XLIII-B1-2022-453-2022
2021 | Borrmann, A.; Bruckmann, T.; Dörfler, K.; Hartmann, T.; Smarsly, K.: Towards realizing the information backbone of robotized construction – Computational methods and cyber-physical architectures for collaborative robotic fleets. In: Proc. of the CIB W78 Conference, 2021.
2021 | Dielemans, G., Briels, D., Jaugstetter, F., Henke, K., Dörfler, K.: Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures. In: Journal of Facade Design & Engineering, 9(1), 59–72. – DOI: https://doi.org/10.7480/jfde.2021.1.5418.
2021 | Dielemans, G., Dörfler, K.: Mobile Additive Manufacturing: a robotic system for cooperative on-site construction. In: IROS 2021 Workshop Robotic Fabrication: Sensing in Additive Construction, 2021.
2021 | Kloft, H., Gehlen, C., Dörfler, K., Hack, N., Henke, K., Lowke, D., Mainka, J. and Raatz, A. (2021), TRR 277: Additive Fertigung im Bauwesen. In: Bautechnik, 98: 222-231. – DOI: https://doi.org/10.1002/bate.202000113.
leads the scientific staff in the orientation and execution of the design process creation and supports them in an advisory capacity in the creation of test geometries and demonstrators. He is responsible for the content and organisational coordination of all work on the part of ITE. He instructs the research engineer at ITE in the conceptual structure, execution and evaluation of the theoretical and experimental research work. He is the spokesperson of the TRR 277.
Project(s)
Integrated Additive Manufacturing Processes for Reinforced Shotcrete 3D Printing (SC3DP) Elements with Precise Surface Quality
Wire and Arc Additive Manufacturing (WAAM) of Complex Individualized Steel Components
Jointing Principles for Combination of Concrete Elements Produced by Different Additive Manufacturing Processes
Central Tasks of the AMC
Publications
All publications from Prof. Dr.-Ing. Harald KloftPublications from Prof. Dr.-Ing. Harald Kloft
Publications
2023 | R. Dörrie, N. Freund, E. Herrmann, A. Baghdadi, I., Mai, F. Galli, M. David, K. Dröder, D. Lowke, H. Kloft: Automated force-flow-oriented reinforcement integration for Shotcrete 3D Printing. In: Automation in Construction, 155, p.105075, https://doi.org/10.1016/j.autcon.2023.105075
https://doi.org/10.3390/buildings12111806
2022 | R. Dörrie, V. Laghi, L. Arrè, G. Kienbaum, N. Babovic, N. Hack, H. Kloft: Combined Additive Manufacturing Techniques for Adaptive Coastline Protection Structures. In: Buildings, vol. 12, no. 11, p. 1806, 2022.
https://doi.org/10.3390/buildings12111806
2022 | R. Dörrie, and H. Kloft: Force-Flow compliant robotic path planning approach for reinforced concrete elements. In Proc. Int. Conf. on Concrete and Digital Fabrication, 2022, pp. 370-375.
2022 | C. Müller, J. Müller, H. Kloft, and J. Hensel : Design of Structural Steel Components According to Manufacturing Possibilities of the Robot-Guided DED-Arc Process. In: Buildings, vol. 12, no. 12, p. 2154. (Dec. 2022.) doi: 10.3390/buildings12122154
2022 | Lachmayer L., Dörrie R., Kloft H., Raatz A.: Process Control for Additive Manufacturing of Concrete Components. In: RILEM Bookseries Vol. 37, pp. 351-356, (3rd RILEM International Conference on Concrete and Digital Fabrication (DC 2022), England), (6 pages), https://doi.org/10.1007/978-3-031-06116-5_52
2022 | Lowke, D.; Gehlen, C.; Kloft, H.; Freund, N.; Matthäus, C.: Bewehrungskonzepte beim 3D-Druck von Konstruktionsbeton. In: BfT International, 02.2021, S. 92.
2022 | Lanwer, J.-P.; Weigel, H.; Baghdadi, A.; Empelmann, M.; Kloft, H.: Jointing Principles in AMC—Part 1: Design and Preparation of Dry Joints. In: Applied Sciences, 2022, 12, 4138
https://doi.org/10.3390/app12094138
2022 | Buswell, R. A.; Bos, F. P.; Leal da Silva, W. R.; Hack, N.; Kloft, H.; Lowke, D.; Freund, N.; Fromm, A.; Dini, E.; Wangler, T.; Lloret-Fritschi, E.; Schipper, R.; Mechtcherine, V.; Perrot, A.; Vasilic, K.; Roussel, N.: Digital Fabrication with Cement-Based Materials: Process Classification and Case Studies. In: Roussel, N. and Lowke, D. (2022). Digital Fabrication with Cement-Based Materials (Reports 36). RILEM State-of-the-Art. DOI: https://doi.org/10.1007/978-3-030-90535-4_2
2022 | Asprone, D.; Menna, C.; Bos, F.; Mata-Falcón, J.; Ferrara, L.; Auricchio, F.; Cadoni, E.; Cunha, V. M. C. F.; Esposito, L.; Fromm, A.; Grünewald, S.; Kloft, H.; Mechtcherine, V.; Naidu Nerella, V.; Schipper, R.: Structural Design and Testing of Digitally Manufactured Concrete Structures. In: Roussel, N. and Lowke, D. (2022). Digital Fabrication with Cement-Based Materials (Reports 36). RILEM State-of-the-Art. DOI: https://doi.org/10.1007/978-3-030-90535-4_6
2020 | Buswell, R.; Kinnell, P.; Xu, J.; Hack, N.; Kloft, H.; Maboudi, M.; Gerke, M.; Massin, P.; Grasser, G.; Wolfs, R.; Bos, F.: Inspection Methods for 3D Concrete Printing. In: RILEM Bookseries 28, pp. 790-803, 2020. – DOI: https://doi.org/10.1007/978-3-030-49916-7_78.
2020 | Kloft, H.; Krauss, H.-W.; Hack, N.; Herrmann, E.; Neudecker, S.; Varady, P.; Lowke, D.: Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP). In: Cement and Concrete Research 134, 2020. – DOI: https://doi.org/10.1016/j.cemconres.2020.106078.
2020 | Kloft, H.; Empelmann, M.; Hack, N.; Herrmann, E. Lowke, D.: Bewehrungsstrategien für den Beton-3D-Druck. In: Beton- und Stahlbetonbau 115, 2020. – DOI: https://onlinelibrary.wiley.com/doi/epdf/10.1002/best.202000032.
2020 | Baghdadi, A.; Heristchian, M.; Ledderose, L.; Kloft, H.: Experimental and numerical assessment of new precast concrete connections under bending loads. In: Engineering Structures 212, ELSEVIER, 2020. – DOI: https://doi.org/10.1016/j.engstruct.2020.110456.
2020 | Hack, N.; Kloft, H.; Lowke, D.: Additive Fertigung im Bauwesen: 3D-Betondruck als eine Schlüsseltechnologie für die Digitalisierung der Bauwirtschaft. In: Ingenieurbaukunst 2020 – Made in Germany, Jahrbuch der Bundesingenieurkammer, S. 178-183, 2020.
2021 | Mai, I.; Brohmann, L.; Freund, N.; Gantner, S.; Kloft, H.; Lowke, D.; Hack, N.: Large Particle 3D Concrete Printing – A Green and Viable Solution. In: Materials, 14, 6125, 2021. DOI: https://doi.org/10.3390/ma14206125.
2021 | Mechtcherine, V.; Buswell, R.; Kloft, H.; Bos, F. P.; Hack, N.; Wolfs, R.; Sanjayan, J.; Nematollahi, B.; Ivaniuk, E.; Neef, T.: Integrating reinforcement in digital fabrication with concrete: A review and classification framework. In: Cement and Concrete Composites, 119, 2021. – DOI: https://doi.org/10.1016/j.cemconcomp.2021.103964.
2021 | Lachmayer, L.; Dörrie, R.; Kloft,H.; Raatz, A.: Automated shotcrete 3D printing – Printing interruption for extended component complexity. In: ISARC, 2021.
2021 | Baghdadi, A.; Doerrie, R.; Kloft, H.: New calculation approach for selecting and orienting the reinforcing material for robotic concrete manufacturing. In: Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures Inspiring the Next Generation. 23 – 27 August, Guilford, UK, 2021.
2021 | Baghdadi, A.; Meshkini, A.; Kloft, H.: Parametric design of in-plane concrete dry joints by FE method and Fuzzy logic toward utilising additive manufacturing technique. In: Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures Inspiring the Next Generation. 23 – 27 August, Guilford, UK, 2021.
2021 | Baghdadi, A.; Meshkini, A.; Kloft, H.: Inspiration of Interlocking Wooden Puzzles for Precast Concrete Construction Conceptual Design of Structures. In: International fib Symposium, September 16-18, Switzerland, 2021.
2021 | Lowke, D.: Injection 3D concrete printing in a carrier liquid – Underlying physics and applications to lightweight space frame structures. In: Cement and Concrete Composites, 2021. – DOI: https://doi.org/10.1016/j.cemconcomp.2021.104169.
2021 | Lowke, D.; Gehlen, C.; Kloft, H.; Freund, N.; Matthäus, C.: Bewehrungskonzepte beim 3D-Druck von Konstruktionsbeton. In: BfT International, 02.2021, S. 92, 2021.
2021 | Alaimo, G.; Carraturo, M.; Korshunova, N.; Kollmannsberger, S.: Numerical evaluation of high cycle fatigue life for additively manufactured stainless steel 316L lattice structures. In: Material Design and Processing Communication 3 (4), pp. e249, Wiley, 2021. – DOI: 10.1002/mdp2.249.
2021 | Kloft, H., Gehlen, C., Dörfler, K., Hack, N., Henke, K., Lowke, D., Mainka, J. and Raatz, A. (2021), TRR 277: Additive Fertigung im Bauwesen. In: Bautechnik, 98: 222-231. – DOI: https://doi.org/10.1002/bate.202000113.
2021 | Empelmann, M.; Kloft, H.: Practical solutions in additive manufacturing – Innovative jointing principles. In: BFT International 87, Issue 2, p. 93.
2020 | Hack, N.; Dressler, I.; Brohmann, L.; Gantner, S.; Lowke, D.; Kloft, H.: Injection 3D Concrete Printing (I3DCP): Basic Principles and Case Studies. In: Materials 2020, 13, 1093, 2020. – DOI: https://doi.org/10.3390/ma13051093.
General Manager / administrative coordinator. He is organizing the day-to-day management of the SFB TRR 277 AMC, supports the Speaker and Co- speaker such as the AMC Board in the coordination of the TRR 277. He is reporting to the AMC Board and is head of the AMC Business Office (AMC-Geschäftsstelle).
Publications
All publications from Dr.-Ing. Jeldrik MainkaPublications from Dr.-Ing. Jeldrik Mainka
Publications
2021 | Kloft, H., Gehlen, C., Dörfler, K., Hack, N., Henke, K., Lowke, D., Mainka, J. and Raatz, A. (2021), TRR 277: Additive Fertigung im Bauwesen. In: Bautechnik, 98: 222-231. – DOI: https://doi.org/10.1002/bate.202000113.