Project A 09 Archives - Additive Manufacturing in Construction (AMC) TRR277

Project A 09

Erasmus Stillner — Mon, 05 Feb 2024 09:51:27 +0000

Networking with other projects

Poster

TRR277_A09_230503_Poster FP2_Begutachtung_Vorlage-PRINTED

Injection 3D Concrete Printing (I3DCP) – Material Efficient Lightweight Reinforced Concrete Structures Based on Spatially Complex Strut-and-Tie-Models

Injection 3D Concrete Printing (I3DCP) is a new additive manufacturing process that was developed independently of the AMC in 2018 by researchers at Technische Universität Braunschweig and in variants by others, e.g. I3DCP will hence join the TRR 277 as a new project. The basic principle of I3DCP is that a fluid of material A is robotically injected into another fluid of another material B. The role of material B is to support material A such that material A maintains a stable position. In general, I3DCP can be categorized into three sub-categories:

(a) Concrete in Suspension (CiS): injection of concrete into a non-hardening carrier liquid;
(b) Suspension in Concrete (SiC): injection of a non-hardening suspension into a concrete; and
(c) Concrete in Concrete (CiC): the injection of a concrete into another concrete with different properties.

Aim

The research project aims to fundamentally understand the two I3DCP techniques CiS and CiC with regard to the underlying material and process interaction as well as its process applications and control. Therefore, the following topics need to be investigated in thorough depth in order to enable a robust and controlled process: (i) rheology and interaction of the two materials, (ii) path-planning algorithm and structural design with graphic statics, (iii) reinforcement integration, and (iv) failure mechanisms and predicting print stability.

Networking with other projects

The project A09 is in direct collaboration with projects from the TRR 277 in order to improve the basic understanding of the principle of I3DCP and enhance the process. Therefore, in the planning phase of physical specimen and demonstrators, a collaboration with C02 (finding design and shape) and B04 (3D path planning) is planned. For the production of specimens, data will be provided to B03 who will focus in modelling the process details such as multi-strand-crossing. For data acquisition after production a collaboration with C06 is envisaged and the obtained data will be also provided to C01 in order to enable an as-is-simulation. Overarching is a collaboration with C09, who will investigate sustainability aspects of the process and will give advice in order to improve the process in this regard. All collaborations are described in detail in the corresponding work packages. In addition to the collaboration with other projects, there are also two associated researchers who have been significantly involved in the research to date, and whose input is also beneficial for further research. On the material side, this is Dirk Lowke, and with regard for structural engineering, Harald Kloft.

More projects of
Focus Area A

Project A 01

Particle-Bed 3D Printing by Selective Cement Activation (SCA) – Sustainability, process enhancement and material models

Project A 02

Particle-Bed 3D Printing by Selective Cement Paste Intrusion (SPI) – Particle Surface Functionalisation, Particle Synthesis and Integration of WAAM Reinforcement

Project A 03

Extrusion of Near-Nozzle Mixed Concrete –Individually Graded in Density and in Rate of 3D Fibre Reinforcement

Project A 04

Integrated Additive Manufacturing Processes for Reinforced Shotcrete 3D Printing (SC3DP) Elements with Precise Surface Quality

Project A 05

Integration of Individualized Prefabricated Fibre Reinforcement in Additive Manufacturing with Concrete

Project A 06

Laser Powder-Bed Fusion (LPBF) of Steel Elements for Construction – Basics of Design and Mechanical Resilience.

Project A 07

Wire and Arc Additive Manufacturing (WAAM) of Complex Individualized Steel Components

Project A 08 (completed)

Structural Timber by Individual Layer Fabrication (ILF)

Project A 10

Earth Additive Manufacturing (EAM) – Material and Process Combinations for AM with Earth-based Materials

The post Project A 09 appeared first on Additive Manufacturing in Construction (AMC) TRR277.

Digital fabrication with concrete beyond horizontal planar layers

Ida Mantey — Tue, 27 Jan 2026 09:02:35 +0000

2024|D. Lowke, A. Anton, R. Buswell, S.E. Jenny, R. J. Flatt, E.L. Fritschi, N. Hack, I. Mai, M. Popescu, H. Kloft: Digital fabrication with concrete beyond horizontal planar layers, Cement and Concrete Research Volume 186, 2024, https://doi.org/10.1016/j.cemconres.2024.107663

The post Digital fabrication with concrete beyond horizontal planar layers appeared first on Additive Manufacturing in Construction (AMC) TRR277.

M. Sc. Leon Döring

Meike Bährens — Tue, 26 Aug 2025 08:59:19 +0000

M. Sc. Leon Döring

Current location: TU Braunschweig

Institute:

Institute of Structural Design

OrcidiD:

0009-0002-5628-261X

l.doering@tu-braunschweig.de

has a background in architecture. Currently, he is a research associate at the Institute of Structural Design (ITE) at TU Braunschweig. His work on Injection 3D Concrete Printing (I3DCP) focuses on investigating strategies for design and fabrication as well as architectural applications. In collaboration with material researchers from TU Berlin, he conducts experiments on material and fabrication parameters, path planning and robot end-effector designs.

The post M. Sc. Leon Döring appeared first on Additive Manufacturing in Construction (AMC) TRR277.

Prof. Dr. sc. ETH Zurich Dipl. Ing. M.A. AA Norman Hack

Erasmus Stillner — Thu, 25 Nov 2021 09:45:56 +0000

Prof. Dr. sc. ETH Zurich Dipl. Ing. M.A. AA Norman Hack

AMC Board

Project leader

Current location: TU Braunschweig

Institute: Institute of Structural Design

OrcidiD: 0000-0002-5261-6726

n.hack@tu-braunschweig.de

is supervising ITE`s requested doctoral researcher during all phases of the research. Additionally, he is actively involved in the conceptual phase, developing reinforcement concepts for the different AM methods.

2024 | G. Dielemans, L. Lachmayer, N. Khader, N. Hack, A. Raatz, K. Dörfler: Robotic Repair: In-Place 3D Printing for Repair of Building Components Using a Mobile Robot Construction 3D Printing, 2024, https://doi.org/10.1007/978-3-031-64269-2_20

2024|H. Kloft, B. Sawicki, F. Bos, R. Dörrie, N. Freund, S. Gantner, L. Gebhard, N. Hack, E. Ivaniuk, J. Kruger, W. Kaufmann: Interaction of reinforcement, process, and form in Digital Fabrication with Concrete, Cement and Concrete Research Volume 186, 2024, https://doi.org/10.1016/j.cemconres.2024.107640

2024 | A. Baghdadi, F. Salehi Amiri, C. Jantzen, H. Kloft: Integration of Augmented Reality for Enhanced Visualization and Analysis in Bridge Engineering, Towards Real-Time Optimization in Structural and Architectural Design, Proceedings of the IASS 2024 Symposium “Redefining the Art of Structural Design”, Zurich, 26–30 August 2024, https://app.iass2024.org/files/IASS_2024_Paper_17.pdf.

Data | LeoPARD, 2024, https://leopard.tu-braunschweig.de/receive/dbbs_mods_00079021

2024 | T. Rothe,S. Gantner, N. Hack, C. Hühne: Characterisation of the alkaline resistance of fibre reinforcement strands produced in a dynamic fibre winding process for 3D concrete printing Proceedings of the fib Symposium, ReConStruct: Resilient Concrete Structures in Christchurch, New Zealand, 11-13 November 2024, pp. 1274–1283.

Data | Zenodo, 2024, https://doi.org/10.5281/zenodo.15101881.

2023 | T. Rothe, S. Gantner, N. Hack, C. Hühne: A Dynamic Winding Process of Individualized Fibre Reinforcement Structures for Additive Manufacturing in Construction. Open Conference Proceedings (2023)

2023 | G. Dielemans, L. Lachmayer, N. Kadher, N. Hack, A. Raatz, K. Dörfler: Robotic Repair: In-place 3D Printing for Repair of Building Components using a Mobile Robot. In: 4th International Conference on 3D Construction Printing (4th 3DcP), Singapore; Springer.

2023 | T. Rothe, J. Pösch, S. Gantner, N. Hack, C. Hühne: Optimization of tensile properties and bond behaviour to concrete of fibre reinforcement strands produced within a dynamic fibre winding process. In: 11th International Conference on Fiber-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2023), Rio de Janeiro, Brazil. 2023, July
https://doi.org/10.5281/zenodo.8133237

2022 | R. Dörrie, V. Laghi, L. Arrè, G. Kienbaum, N. Babovic, N. Hack, H. Kloft: Combined Additive Manufacturing Techniques for Adaptive Coastline Protection Structures. In: Buildings, vol. 12, no. 11, p. 1806, 2022.
https://doi.org/10.3390/buildings12111806

2022 | Gantner, S., Rennen, P., Rothe, T., Hühne, C., & Hack, N.: Core Winding: Force-Flow Oriented Fibre Reinforcement in Additive Manufacturing with Concrete. In: RILEM International Conference on Concrete and Digital Fabrication (pp. 391-396), (2022) Springer, Cham

2022 | Hack, N.; Jantzen, C.; Brohmann, L.; Gerke, M.; Mawas, K.; Maboudi, M.: A Closed-Loop Workflow for Quality Inspection and Integrated Post-processing of 3D-Printed Concrete Elements. In: RILEM Bookseries, 364-369 (2022)
https://doi.org/10.1007/978-3-031-06116-5_54

2022 | Buswell, R. A.; Bos, F. P.; Leal da Silva, W. R.; Hack, N.; Kloft, H.; Lowke, D.; Freund, N.; Fromm, A.; Dini, E.; Wangler, T.; Lloret-Fritschi, E.; Schipper, R.; Mechtcherine, V.; Perrot, A.; Vasilic, K.; Roussel, N.: Digital Fabrication with Cement-Based Materials: Process Classification and Case Studies. In: Roussel, N. and Lowke, D. (2022). Digital Fabrication with Cement-Based Materials (Reports 36). RILEM State-of-the-Art. DOI: https://doi.org/10.1007/978-3-030-90535-4_2

2021 | Gantner, S.; Rothe, T.; Hühne, C.; Hack, N.: Reinforcement strategies for additive manufacturing in construction based on Dynamic Fibre Winding: Concepts and initial case studies. In: Vision and Strategies for Reinforcing Additively Manufactured Concrete Structures, Conference, Dresden, Germany, 2021.

2021 | Mai, I.; Brohmann, L.; Freund, N.; Gantner, S.; Kloft, H.; Lowke, D.; Hack, N.: Large Particle 3D Concrete Printing – A Green and Viable Solution. In: Materials, 14, 6125, 2021. DOI: https://doi.org/10.3390/ma14206125.

2021 | Mechtcherine, V.; Buswell, R.; Kloft, H.; Bos, F. P.; Hack, N.; Wolfs, R.; Sanjayan, J.; Nematollahi, B.; Ivaniuk, E.; Neef, T.: Integrating reinforcement in digital fabrication with concrete: A review and classification framework. In: Cement and Concrete Composites, 119, 2021. – DOI: https://doi.org/10.1016/j.cemconcomp.2021.103964.

2021 | Placzek, G., Brohmann, L., Mawas, K., Schwerdtner, P., Hack, N., Maboudi M., Gerke, M.: D.: A Lean-based Production Approach for Shotcrete 3D Printed Concrete Components. In: 2021 Proceedings of the 38th ISARC, Dubai, UAE, Pages 811-818
doi.org/10.22260/ISARC2021/0110

2021 | Lowke, D.: Injection 3D concrete printing in a carrier liquid – Underlying physics and applications to lightweight space frame structures. In: Cement and Concrete Composites, 2021. – DOI: https://doi.org/10.1016/j.cemconcomp.2021.104169.

2021 | Hack, N.; Bahar, M.; Hühne, C.; Lopez, W.; Gantner, S.; Khader, N.; Rothe, T.: Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing. In: Fibers 2021, 9, 39, 2021. – DOI: https://doi.org/10.3390/fib9060039.

2021 | Kloft, H., Gehlen, C., Dörfler, K., Hack, N., Henke, K., Lowke, D., Mainka, J. and Raatz, A. (2021), TRR 277: Additive Fertigung im Bauwesen. In: Bautechnik, 98: 222-231. – DOI: https://doi.org/10.1002/bate.202000113.

2020 | Hack, N.; Kloft, H.; Lowke, D.: Additive Fertigung im Bauwesen: 3D-Betondruck als eine Schlüsseltechnologie für die Digitalisierung der Bauwirtschaft. In: Ingenieurbaukunst 2020 – Made in Germany, Jahrbuch der Bundesingenieurkammer, S. 178-183, 2020.

2020 | Maboudi, M.; Gerke, M.; Hack, N.; Brohmann, L.; Schwerdtner, P.; Placzek, G.: Current Surveying Methods for the Integration of Additive Manufacturing in the Construction Process. In: The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XLIII-B4-2020, 2020 XXIV ISPRS Congress, 2020. – DOI: https://doi.org/10.5194/isprs-archives-XLIII-B4-2020-763-2020.

2020 | Buswell, R.; Kinnell, P.; Xu, J.; Hack, N.; Kloft, H.; Maboudi, M.; Gerke, M.; Massin, P.; Grasser, G.; Wolfs, R.; Bos, F.: Inspection Methods for 3D Concrete Printing. In: RILEM Bookseries 28, pp. 790-803, 2020. – DOI: https://doi.org/10.1007/978-3-030-49916-7_78.

2020 | Kloft, H.; Krauss, H.-W.; Hack, N.; Herrmann, E.; Neudecker, S.; Varady, P.; Lowke, D.: Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP). In: Cement and Concrete Research 134, 2020. – DOI: https://doi.org/10.1016/j.cemconres.2020.106078.

2020 | Kloft, H.; Empelmann, M.; Hack, N.; Herrmann, E. Lowke, D.: Bewehrungsstrategien für den Beton-3D-Druck. In: Beton- und Stahlbetonbau 115, 2020. – DOI: https://onlinelibrary.wiley.com/doi/epdf/10.1002/best.202000032.

2020 | Hack, N.; Dressler, I.; Brohmann, L.; Gantner, S.; Lowke, D.; Kloft, H.: Injection 3D Concrete Printing (I3DCP): Basic Principles and Case Studies. In: Materials 2020, 13, 1093, 2020. – DOI: https://doi.org/10.3390/ma13051093.

The post Prof. Dr. sc. ETH Zurich Dipl. Ing. M.A. AA Norman Hack appeared first on Additive Manufacturing in Construction (AMC) TRR277.

M. Sc. Ando Anatol Nepomuk Jacobi

Alessa Zinn — Wed, 25 Jun 2025 14:54:21 +0000

M. Sc. Ando Anatol Nepomuk Jacobi

Current location: TU Berlin

Institute: Institut für Bauingenierwesen - Robotergestützte Fertigung der gebauten Umwelt Institute of Civil Enginieering

OrcidiD: 0009 0007 3083 0725

a.jacobi@tu-berlin.de

Is a doctoral researcher at the Department of Robotic Manufacturing of the Built Environment at TU Berlin. His work in Project A09 focuses on investigating material and process parameters with regards to Injection Printing. This includes the fabrication of specimen using Injection Printing as well as studies on material properties.

The post M. Sc. Ando Anatol Nepomuk Jacobi appeared first on Additive Manufacturing in Construction (AMC) TRR277.

Prof. Dr.-Ing. Inka Mai

Erasmus Stillner — Thu, 25 Nov 2021 16:09:04 +0000

Prof. Dr.-Ing. Inka Mai

Project leader

Current location: TU Berlin

Institute: Institute of Civil Engineering, Department of Robotic Manufacturing of the Built Environment

OrcidiD: 0000-0002-3182-5086

mai@tu-berlin.de

is Junior-Professor at the Institute of Civil Engineering, Department of Robotic Manufacturing of the Built Environment at Technische Universität Berlin.

2025 | N. Meier, F. Herding, H. Zetzener, I. Mai, D. Lowke, A. Kwade: Surface modification of bulk material for particle bed 3D concrete printing – Effect on wettability, porosity, and mechanical properties Advanced Powder Technology, 2025, https://doi.org/10.1016/j.apt.2025.105123

Data |Zenodo, 2025, https://doi.org/10.5281/zenodo.17641009

2024 |D. Böhler, I. Mai, D. Lowke: Durability of 3D Printed Concrete: A Comparison of Extrusion 3D Printing, Shotcrete 3D Printing and Conventional Casting, Fourth RILEM International Conference on Concrete and Digital Fabrication Munich, RILEM Bookseries, vol 53, Springer, 2024, https://doi.org/10.1007/978-3-031-70031-6_33

2023 |D. Böhler, N. Freund, I. Mai, D. Lowke: Shotcrete 3D printing – effect of material‐process interaction on the global and local material density, ce/papers, 2023, 6, 770–776, https://doi.org/10.1002/cepa.2822

2024 | J. Hitzegrad, L. Brohmann, F. Herding, K. Pfennings, S. Jonischkies, E. Scharnbeck, J. Mainka, I. Mai, C. Windt, H. Kloft, A. Wehrmann, D. Lowke, N. Goseberg: Surfaces of coastal biogenic structures: exploiting advanced digital design and fabrication strategies for the manufacturing of oyster reef and mussel bed surrogates, Front. Mar. Sci., 11:1395025, 2024, https://doi.org/10.3389/fmars.2024.1395025

2023 | R. Dörrie, N. Freund, E. Herrmann, A. Baghdadi, I., Mai, F. Galli, M. David, K. Dröder, D. Lowke, H. Kloft: Automated force-flow-oriented reinforcement integration for Shotcrete 3D Printing. In: Automation in Construction, 155, p.105075, https://doi.org/10.1016/j.autcon.2023.105075
https://doi.org/10.3390/buildings12111806

2023 | N. Freund, M. David, D. Böhler, I. Mai, S. Ullmann, K. Dröder, D. Lowke: Shotcrete 3D Printing – Interaction of nozzle geometry, homogeneity and hardened concrete properties. In: International Conference on Building Materials (ibausil) 2023

2023 | D. Böhler, N. Freund, I. Mai, D. Lowke, D: Shotcrete 3D Printing – Effect of material-process interaction on the global and local material density. In: International Conference on Building Materials (ibausil) 2023

2023 | F. Herding, I. Mai, D. Lowke: Reduction of the cement content in Selective Cement Activation. In: ibausil 2023
https://doi.org/10.1002/cepa.2826

2023 | F. Herding, I. Mai, D. Lowke: Effect of Grain Size and Layer Thickness on Hardened State Properties in Selective Cement Activation. In: ibausil 2023
https://doi.org/10.1002/cepa.2816

2023 | D. Talke, B. Saile, N. Meier, F. Herding, I. Mai, H. Zetzener, A. Kwade, D. Lowke: Particle-bed 3D printing by selective cement activation – Influence of process parameters on particle-bed density. In: Cement and Concrete Research, 168. (2023)
https://doi.org/10.1016/j.cemconres.2023.107140

2022 | Lachmayer, L.; Böhler, D.; Freund, N.; Mai, I.; Lowke, D.; Raatz, A.: Modelling the influence of material and process parameters on shotcrete 3D printing strands – cross-section adjustment for automatic robotic manufacturing. Automation in Construction, Volume 145, https://doi.org/10.1016/j.autcon.2022.104626

2022 | Böhler, D., Mai, I., Freund, N., Lachmayer, L., Raatz, A., Lowke, D.: Influence of Material and Process Parameters on Hardened State Properties of Shotcrete 3D-Printed Elements. In: Buswell, R., Blanco, A., Cavalaro, S., Kinnell, P. (eds) Third RILEM International Conference on Concrete and Digital Fabrication. DC 2022. RILEM Bookseries, vol 37. Springer, Cham.
https://doi.org/10.1007/978-3-031-06116-5_38

2022 | Herding, F., Mai, I., Lowke, D.: Effect of Curing in Selective Cement Activation. In: Buswell, R., Blanco, A., Cavalaro, S., Kinnell, P. (eds) Third RILEM International Conference on Concrete and Digital Fabrication. DC 2022. RILEM Bookseries, vol 37. Springer, Cham.
https://doi.org/10.1007/978-3-031-06116-5_42

2022 | Mai, I.; Lowke, D.; Perrot, A.: Fluid intrusion in powder beds for selective cement activation – an experimental and analytical study. In: Cement and Concrete Research, CCR 156 (106771), 2022
https://doi.org/10.1016/j.cemconres.2022.106771

2022 | Lowke, D.; Mai, I.; Keita, E.; Perrot, A.; Weger, D.; Gehlen, C.; Herding, F.; Zuo, Wenqiang; Roussel, N.: Material-process interactions in particle bed 3D printing and the underlying physics. In: Cement and Concrete Research, CCR 156 (106748), 2022
https://doi.org/10.1016/j.cemconres.2022.106748

2022 | Mai, I., Herding, F., Lowke, D.: Evaluating the Effect of Methyl Cellulose on Hardened State Properties in Selective Cement Activation. In: Buswell, R., Blanco, A., Cavalaro, S., Kinnell, P. (eds) Third RILEM International Conference on Concrete and Digital Fabrication. DC 2022. RILEM Bookseries, vol 37. Springer, Cham.
https://doi.org/10.1007/978-3-031-06116-5_43

2022 |Lowke, D.; Mai, I.; Keita, E.; Perrot, A.; Weger, D,; Gehlen, C.; Herding, F.; Zuo, W.; Roussel, N.: Material-process interactions in particle bed 3D printing and the underlying physics, In: Cement and Concrete Research, Volume 156, June 2022, 106748, DOI: http//:doi.org/10.1016/j.cemconres.2022.106748

2022 |Lowke, D.; Mai, I.; Perrot, A.: Fluid intrusion in powder beds for selective cement activation – An experimental and analytical study, In: Cement and Concrete Research, Volume 156, June 2022, 106748, DOI: http//:doi.org/10.1016/j.cemconres.2022.106771

2021 | Gehlen, C.; Lowke, D.; Weger, D.; Dreßler, I.: Dauerhaftigkeit – Potenzial additiver Fertigung und Performance im Vergleich zu konventioneller Fertigung. In: BfT International, 02.2021, S. 94, 2021.

2020 | Freund, N.; Dressler, I.; Lowke, D.: Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process. In: RILEM Bookseries 28, pp. 612–621, 2020. – DOI: https://doi.org/10.1007/978-3-030-49916-7_62.

2020 | Dressler, I.; Freund, N.; Lowke, D.: Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage amd Process Parameters. In: RILEM Bookseries 28, pp. 42–52, 2020. – DOI: https://doi.org/10.1007/978-3-030-49916-7_5.

2020 | Lowke, D.; Talke, D.; Dreßler, I.; Weger, D.; Gehlen, C.; Ostertag, C.; Rael, R.: Particle bed 3D printing by selective cement activation – Applications, material and process technology. In: Cement and Concrete Research 134,2020. – DOI: https://doi.org/10.1016/j.cemconres.2020.106077.

2020 | Dreßler, I.; Freund, N.; Lowke, D.: The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing. In: Materials 2020, 13, 374, 2020. – DOI: https://doi.org/10.3390/ma13020374.

The post Prof. Dr.-Ing. Inka Mai appeared first on Additive Manufacturing in Construction (AMC) TRR277.

Dr.-Ing. Samim Mehdizadeh

Alessa Zinn — Wed, 07 May 2025 13:19:50 +0000

Dr.-Ing. Samim Mehdizadeh

Current location: TU Braunschweig

Institute:

Institut für Tragwerksentwurf (ITE) / Institute of Structural Design

OrcidiD:

0000 0001 6191 0380

samim.mehdizadeh@tu-braunschweig.de

Dr.-Ing. Samim Mehdizadeh co-leads research activities and supervises doctoral researchers in the areas of lightweight concrete, on-site robotic fabrication, and multi-robotic fabrication. Within the Collaborative Research Center TRR 277 “Additive Manufacturing in Construction” (AMC),he supports Prof. Norman Hack as Postdoctoral Researcher in leading the research projects A-05 and A-09 at the Institute for Structural Design (ITE) at TU Braunschweig.

The post Dr.-Ing. Samim Mehdizadeh appeared first on Additive Manufacturing in Construction (AMC) TRR277.

M. Sc. Yinan Xiao

Meike Bährens — Fri, 09 Feb 2024 09:39:50 +0000

M. Sc. Yinan Xiao

Current location: TU Braunschweig

Institute: Institute of Structual Design

OrcidiD: 0000-0001-5583-3956

yinan.xiao@tu-braunschweig.de

Is a doctoral researcher at the Institute of Structural Design (ITE) at TU Braunschweig.

The post M. Sc. Yinan Xiao appeared first on Additive Manufacturing in Construction (AMC) TRR277.

Project A 09 Archives - Additive Manufacturing in Construction (AMC) TRR277

Project A 09

Networking with other projects

Poster

Aim

Networking with other projects

Project leaders

Contributors

Related Publications

More projects of
Focus Area A

Digital fabrication with concrete beyond horizontal planar layers

M. Sc. Leon Döring

M. Sc. Leon Döring

Project(s)

Publications

Prof. Dr. sc. ETH Zurich Dipl. Ing. M.A. AA Norman Hack

Prof. Dr. sc. ETH Zurich Dipl. Ing. M.A. AA Norman Hack

Project(s)

Publications

M. Sc. Ando Anatol Nepomuk Jacobi

M. Sc. Ando Anatol Nepomuk Jacobi

Project(s)

Publications

Prof. Dr.-Ing. Inka Mai

Prof. Dr.-Ing. Inka Mai

Project(s)

Publications

Dr.-Ing. Samim Mehdizadeh

Dr.-Ing. Samim Mehdizadeh

Project(s)

M. Sc. Yinan Xiao

M. Sc. Yinan Xiao

Project(s)

Publications

Project A 09 Archives - Additive Manufacturing in Construction (AMC) TRR277

Project A 09

Networking with other projects

Poster

Aim

Networking with other projects

Project leaders

Project(s)

Project(s)

Contributors

Project(s)

Project(s)

Project(s)

Project(s)

Related Publications

More projects of Focus Area A

Digital fabrication with concrete beyond horizontal planar layers

M. Sc. Leon Döring

M. Sc. Leon Döring

Project(s)

Publications

Prof. Dr. sc. ETH Zurich Dipl. Ing. M.A. AA Norman Hack

Prof. Dr. sc. ETH Zurich Dipl. Ing. M.A. AA Norman Hack

Project(s)

Publications

M. Sc. Ando Anatol Nepomuk Jacobi

M. Sc. Ando Anatol Nepomuk Jacobi

Project(s)

Publications

Prof. Dr.-Ing. Inka Mai

Prof. Dr.-Ing. Inka Mai

Project(s)

Publications

Dr.-Ing. Samim Mehdizadeh

Dr.-Ing. Samim Mehdizadeh

Project(s)

M. Sc. Yinan Xiao

M. Sc. Yinan Xiao

Project(s)

Publications

More projects of
Focus Area A